Spreader Beams

This easily configurable Model X lifting and spreader beams feature a bolt together design ... which means distributors can stock a few standard components and quickly create a custom lifter.

• ·10' maximum spread
• ·10-ton capacity
• ·Can be reconfigured in the field
• ·Accessories available: Fork Pockets, Handles, and Center Lift Points

Caldwell engineers this to the application rather than to a standard size table, so there are no catalogue part numbers. Tell us the load, the geometry and the headroom and we’ll have it quoted.

This easily configurable Model X lifting and spreader beams feature a bolt together design ... which means distributors can stock a few standard components and quickly create a custom lifter.

• ·10' maximum spread
• ·10-ton capacity
• ·Can be reconfigured in the field
• ·Accessories available: Fork Pockets, Handles, and Center Lift Points

Caldwell engineers this to the application rather than to a standard size table, so there are no catalogue part numbers. Tell us the load, the geometry and the headroom and we’ll have it quoted.

This easily configurable Model X lifting and spreader beams feature a bolt together design ... which means distributors can stock a few standard components and quickly create a custom lifter.

• ·10' maximum spread
• ·10-ton capacity
• ·Can be reconfigured in the field
• ·Accessories available: Fork Pockets, Handles, and Center Lift Points

Caldwell engineers this to the application rather than to a standard size table, so there are no catalogue part numbers. Tell us the load, the geometry and the headroom and we’ll have it quoted.

Not all picks require low-headroom beams. And sometimes you need the extra stability of a chain or wire rope rigging. In those situations, the Model 30 Fixed Spreader Beam is the right choice.

• ·Ideal where headroom is not limited
• ·Adds stability to lift
• ·Available with standard chain or wire rope rigging
• ·Available with Adjust-A-Leg® rigging for off-center load adjustment (minimum lifting capacity will be approximately 10-15% of beam rating)
• ·Wide range of additional sizes and capacities available
• ·Complies with ASME standards

Dura-Lite™ Model 430 Composite Spreader Beam Get all the benefits of a Model 30 in a lighter weight beam that brings a host of advantages! Composite construction so you can use it in extreme environments. Lighter weight to make lifting, transporting and staging easier on operators. Lift heavier because your beam weighs less.

• ·Lightweight
• ·Proof tested with certificate issued
• ·Patent No. US 9,359,174, B2
• ·Non-conductive
• ·Corrosion resistant
• ·Dura-Lite™ product is compliant with European Community standards CE

50 ton Weight (lbs.)* HR at 45° (in.) HR at 60° (in.) Bottom Shackle 30HC - 50 - 10 690 92 136 25 Ton BTAS 35 Ton BTAS 60 ton Weight (lbs.)* HR at 45° (in.) HR at 60° (in.) Bottom Shackle

• ·30HC - 70 - 10 830 96 140 55 Ton BTAS 55 Ton BTAS 80 ton Weight (lbs.)* HR at 45° (in.) HR at 60° (in.) Bottom Shackle
• ·Top Shackle
• ·30HC - 70 - 8 750 84 120 55 Ton BTAS 55 Ton BTAS
• ·Unique pivoting lower lugs allow for 75° to 90° lower rigging angle
• ·Capacities from 5 to 130 tons
• ·30HC - 80 - 10 830 N/A 140 55 Ton BTAS 55 Ton BTAS 90 ton Weight (lbs.)* HR at 45° (in.) HR at 60° (in.) Bottom Shackle

Caldwell engineers this to the application rather than to a standard size table, so there are no catalogue part numbers. Tell us the load, the geometry and the headroom and we’ll have it quoted.

• ·Ideal where headroom is not limited
• ·Adds stability to lift
• ·Telescopic spread standard
• ·For 2- to 15-ton capacity units, spread adjusts in 1" increments
• ·For 20- to 40-ton capacity units, spread adjusts in 12" increments
• ·Available with standard chain or wire rope rigging

More stability and knock-down design means safer lifts and easier transport. Want to customize it? Pair it with the end fittings below.

• ·New knock-down design is easily transported
• ·6- or 9-ton capacity
• ·Spreads up to 10' x 10'
• ·4-point spreader beam provides more stability
• ·Lower lifting shackles standard - see other options below
• ·Complies with ASME standards

Caldwell engineers this to the application rather than to a standard size table, so there are no catalogue part numbers. Tell us the load, the geometry and the headroom and we’ll have it quoted.

More stability and knock-down design means safer lifts and easier transport. Want to customize it? Pair it with the end fittings below.

• ·New knock-down design is easily transported
• ·6- or 9-ton capacity
• ·Spreads up to 10' x 10'
• ·4-point spreader beam provides more stability
• ·Lower lifting shackles standard - see other options below
• ·Complies with ASME standards

Caldwell engineers this to the application rather than to a standard size table, so there are no catalogue part numbers. Tell us the load, the geometry and the headroom and we’ll have it quoted.

Sometimes, you need to create it yourself. Let Caldwell help. Choose from different end fittings and a pipe coupler to get the beam you want.

• ·The length of pipe used for this central element must be straight within 1/4" end to end
• ·The pipe should have the ends cleanly cut square with its centerline
• ·The A53 Grade B, schedule 40 pipe should not have any weld joint irregularities
• ·Each end of the A53 Grade B, schedule 40 pipe must have the correct diameter holes drilled through both walls and both ends must be in line
• ·Designed to work with a range of shackle sizes, both top and bottom
• ·Sold as eaches, not pairs

Assembly Information. Capacity depends on both the span and the sling angle, so Caldwell publishes it as a chart rather than a list of part numbers. We haven’t retyped it here — read it off the chart on page 38 of their catalogue, or send us the span and the angle and we’ll confirm the rating in writing.

Sometimes, you need to create it yourself. Let Caldwell help. Choose from different end fittings and a pipe coupler to get the beam you want.

• ·The length of pipe used for this central element must be straight within 1/4" end to end
• ·The pipe should have the ends cleanly cut square with its centerline
• ·The A53 Grade B, schedule 40 pipe should not have any weld joint irregularities
• ·Each end of the A53 Grade B, schedule 40 pipe must have the correct diameter holes drilled through both walls and both ends must be in line
• ·Designed to work with a range of shackle sizes, both top and bottom
• ·Sold as eaches, not pairs

Assembly Information. Capacity depends on both the span and the sling angle, so Caldwell publishes it as a chart rather than a list of part numbers. We haven’t retyped it here — read it off the chart on page 38 of their catalogue, or send us the span and the angle and we’ll confirm the rating in writing.

• ·Add flexibility to your spreader beam end fitting system
• ·Maximum of two couplers per assembly allowed
• ·Securely joins two pipe lengths to create a longer spreader beam
• ·Innovative design reduces sag in the spread system once assembled
• ·Includes all connecting pin or bolts
• ·Complies with ASME standards when assembled to specifications using designated pipe and rigging

• ·Add flexibility to your spreader beam end fitting system
• ·Maximum of two couplers per assembly allowed
• ·Securely joins two pipe lengths to create a longer spreader beam
• ·Innovative design reduces sag in the spread system once assembled
• ·Includes all connecting pin or bolts
• ·Complies with ASME standards when assembled to specifications using designated pipe and rigging