Skip to content

Products

Hoists & Trolleys

Electric, manual, and air — plus the parts to keep them running

A complete range of electric, pneumatic, and manual hoists for industrial, manufacturing, construction, and commercial applications. We supply hoists to your specification to meet your load, duty cycle, and environment.

We stock and service the major brands, which matters when a hoist goes down: we can usually repair what you have rather than sell you a replacement, and we carry the wear parts that actually fail.

We inspect and repair every brand, including ones we don’t sell. If yours isn’t listed below, we can still service it.

Browse

Find the hoist by how the job actually works

Filter by power, capacity, brand, and how it mounts. Every capacity and product code is the manufacturer's published figure — we don't interpolate ratings.

36 series. Filters load in a moment — or pick one here.

Choosing

Which kind of hoist

Most of the decision is made before capacity ever comes up.

Manual

Hand chain and lever. No power needed, nothing to fail electrically.

Electric chain

The workhorse. Single or three phase, single or dual speed.

Air powered

Continuous duty, spark resistant, washdown. Runs all shift without heating up.

Electric wire rope

Higher capacity and faster lifts than chain, with a longer usable lift.

Parts, load chain, and anything already hanging in your building

Hoist parts and Hoist load chain depend on the machine in front of you — brand, model, serial, and often what’s actually worn. Quickest is to ask. We carry wear parts for the brands we sell and plenty we don’t, and we repair hoists of every make.

Before you order, we’ll need three things

Voltage — most electric hoist motors are not reconnectable, so 460V and 230V are different part numbers, not a setting. Lift — standard is 10 ft and anything else is built to order. Beam flange width — if it’s going on a trolley. Getting these right up front is the difference between a hoist that ships and one that goes back.

Also from Caldwell

Caldwell hoist packages

Electric chain and air hoists, and the packaged hoist-and-trolley combinations Caldwell supplies with their cranes.

EE Endless Sling

EEEndless Sling

Caldwell

2.28 – 4.00 4.01 – 8.00 Weight (lbs.) 35 40 45 71 73 74 Speeds N/A N/A G – 1.1 N/A hoist 36 fpm G – 1.1 Headroom (in.) 16.1 15.6 Capacity (tons) 1/2 1/2 Models MM and ME Lift (ft.) 10 15 20 D – 7.2 10 15 20 D – 7.2 Model Number MM-1/2-10 MM-1/2-15 MM-1/2-20 C – 0.7 ME-1/2-10 ME-1/2-15 ME-1/2-20 C – 0.7

  • Capacity Range: 1/8 to 8 ton
  • Power Supply: 208-230/460V-3-60 (others are available)
  • Heavy-duty design
  • Upper and lower limit switch
  • Control Voltage: 110V
  • Thermal protected fan cooled motor

Caldwell engineers this to the application rather than to a standard size table, so there are no catalogue part numbers. Tell us the load, the geometry and the headroom and we’ll have it quoted.

Quote thisCaldwell catalogue p280
ME Hoist

MEHoist

Caldwell

2.28 – 4.00 4.01 – 8.00 Weight (lbs.) 35 40 45 71 73 74 Speeds N/A N/A G – 1.1 N/A hoist 36 fpm G – 1.1 Headroom (in.) 16.1 15.6 Capacity (tons) 1/2 1/2 Models MM and ME Lift (ft.) 10 15 20 D – 7.2 10 15 20 D – 7.2 Model Number MM-1/2-10 MM-1/2-15 MM-1/2-20 C – 0.7 ME-1/2-10 ME-1/2-15 ME-1/2-20 C – 0.7

  • Capacity Range: 1/8 to 8 ton
  • Power Supply: 208-230/460V-3-60 (others are available)
  • Heavy-duty design
  • Upper and lower limit switch
  • Control Voltage: 110V
  • Thermal protected fan cooled motor

Caldwell engineers this to the application rather than to a standard size table, so there are no catalogue part numbers. Tell us the load, the geometry and the headroom and we’ll have it quoted.

Quote thisCaldwell catalogue p280

MMHoist

Caldwell

2.28 – 4.00 4.01 – 8.00 Weight (lbs.) 35 40 45 71 73 74 Speeds N/A N/A G – 1.1 N/A hoist 36 fpm G – 1.1 Headroom (in.) 16.1 15.6 Capacity (tons) 1/2 1/2 Models MM and ME Lift (ft.) 10 15 20 D – 7.2 10 15 20 D – 7.2 Model Number MM-1/2-10 MM-1/2-15 MM-1/2-20 C – 0.7 ME-1/2-10 ME-1/2-15 ME-1/2-20 C – 0.7

  • Capacity Range: 1/8 to 8 ton
  • Power Supply: 208-230/460V-3-60 (others are available)
  • Heavy-duty design
  • Upper and lower limit switch
  • Control Voltage: 110V
  • Thermal protected fan cooled motor

Caldwell engineers this to the application rather than to a standard size table, so there are no catalogue part numbers. Tell us the load, the geometry and the headroom and we’ll have it quoted.

Quote thisCaldwell catalogue p280
HSN Electric Chain Hoist

HSNElectric Chain Hoist

Caldwell
  • Capacity Range: 1/4 to 3 ton
  • Power Supply: 115/230-1-60
  • Control Voltage: 110V
  • Classifications: ASME H4, ISO-M5 or M4, FEM-2m or 1Am
  • Heavy-duty design
  • Extreme-duty motor
Model NumberCapacity (lbs.)Lift (ft.)Speed (ft./min.)Headroom (in.)Weight (lbs.)
HSN-1/4-10-S500101413.882
HSN-1/2-10-L100010714.084
HSN-1/2-10-S1000101514.6104
HSN-1-10-L200010716.1110
HSN-1-10-S2000101417.3159
HSN-2-10-L400010722.6174
HSN-3-10-C6000103.529.5207
Quote thisCaldwell catalogue p282
HED Electric Chain Hoise

HEDElectric Chain Hoise

Caldwell
  • Capacity Range: 125 to 1050 pounds
  • Power Supply: 120-1-60
  • Control Voltage: 120V direct
  • Classifications: ASME H2
  • Low-headroom design
  • Heavy-duty motor
Model NumberCapacity (lbs.)Lift (ft.)Speed (ft./min.)Headroom (in.)Weight (lbs.)
HED-125-10-S125106912.423
HED-220-10-S220104312.423
HED-250-10-S250102612.424
HED-350-10-S350106613.033
HED-400-10-S400102612.424
HED-525-10-S525104413.033
HED-1050-10-S1050102220.546
Model NumberCapacity (lbs.)Lift (ft.)Speed (ft./min.)Headroom (in.)Weight (lbs.)
HED-125-10-DS1251069/1312.424
HED-220-10-DS2201043/1012.424
HED-250-10-DS2501026/1012.425
HED-350-10-DS3501066/1313.034
HED-400-10-DS4001026/1012.425
HED-525-10-DS5251044/1013.034
HED-1050-10-DS10501022/620.547
Model NumberCapacity (lbs.)Lift (ft.)Speed (ft./min.)Headroom (in.)Weight (lbs.)
HED-125-6-DA125669/1337.231
HED-220-6-DA220643/1037.231
HED-250-6-DA250626/1037.232
HED-350-6-DA350666/1337.840
HED-400-6-DA400626/1037.232
HED-525-6-DA525644/1037.840
Quote thisCaldwell catalogue p283
HAH Mini Air Hoist

HAHMini Air Hoist

Caldwell
  • Capacity Range: 250 to 500 pounds
  • Air Supply Required: 19-34 CFM at 60-90 PSI
  • Air Lubrication: Minimum 10 to 15 drops of oil per minute
  • Air Filtration: Maximum 5 micron air filter or finer
  • Air Inlet Port: 3/8" NPT
  • Unlimited duty cycle

at 90 psi · Speed Up · Speed Down · (ft./min.)

Model NumberCapacity (lbs.)Lift (ft.)Full LoadNo LoadFull LoadNo LoadHeadroom (in.)Weight (lbs.)
HAH-1/8-10-C250104761514512.015
HAH-1/4-10-C500103261564512.015

at 90 psi · Speed Up · Speed Down · (ft./min.)

Model NumberCapacity (lbs.)Lift (ft.)Full LoadNo LoadFull LoadNo LoadHeadroom (in.)Weight (lbs.)
HAH-1/8-10-P250104255484312.019
HAH-1/4-10-P500102955534312.019

at 90 psi · Speed Up · Speed Down · (ft./min.)

Model NumberCapacity (lbs.)Lift (ft.)Full LoadNo LoadFull LoadNo LoadHeadroom (in.)Weight (lbs.)
HAH-1/8-10-M2506.54154474233.024
HAH-1/4-10-M5006.52954534233.024

at 90 psi · Speed Up · Speed Down · (ft./min.)

Model NumberCapacity (lbs.)Lift (ft.)Full LoadNo LoadFull LoadNo LoadHeadroom (in.)Weight (lbs.)
HTC-1/4-10-P5001012120719712516.342
HTC-1/2-10-P100010601081086216.342
HTC-1-10-P2000103054543117.955

at 90 psi · Speed Up · Speed Down · (ft./min.)

Model NumberCapacity (lbs.)Lift (ft.)Full LoadNo LoadFull LoadNo LoadHeadroom (in.)Weight (lbs.)
HTC-1/4-10-C5001012120719712516.340
HTC-1/2-10-C100010601081086216.340
HTC-1-10-C2000103054543117.953
Quote thisCaldwell catalogue p284
HTC Air Hoist - HTC I

HTCAir Hoist - HTC I

Caldwell
  • Capacity Range: 250 to 500 pounds
  • Air Supply Required: 19-34 CFM at 60-90 PSI
  • Air Lubrication: Minimum 10 to 15 drops of oil per minute
  • Air Filtration: Maximum 5 micron air filter or finer
  • Air Inlet Port: 3/8" NPT
  • Unlimited duty cycle

at 90 psi · Speed Up · Speed Down · (ft./min.)

Model NumberCapacity (lbs.)Lift (ft.)Full LoadNo LoadFull LoadNo LoadHeadroom (in.)Weight (lbs.)
HAH-1/8-10-C250104761514512.015
HAH-1/4-10-C500103261564512.015

at 90 psi · Speed Up · Speed Down · (ft./min.)

Model NumberCapacity (lbs.)Lift (ft.)Full LoadNo LoadFull LoadNo LoadHeadroom (in.)Weight (lbs.)
HAH-1/8-10-P250104255484312.019
HAH-1/4-10-P500102955534312.019

at 90 psi · Speed Up · Speed Down · (ft./min.)

Model NumberCapacity (lbs.)Lift (ft.)Full LoadNo LoadFull LoadNo LoadHeadroom (in.)Weight (lbs.)
HAH-1/8-10-M2506.54154474233.024
HAH-1/4-10-M5006.52954534233.024

at 90 psi · Speed Up · Speed Down · (ft./min.)

Model NumberCapacity (lbs.)Lift (ft.)Full LoadNo LoadFull LoadNo LoadHeadroom (in.)Weight (lbs.)
HTC-1/4-10-P5001012120719712516.342
HTC-1/2-10-P100010601081086216.342
HTC-1-10-P2000103054543117.955

at 90 psi · Speed Up · Speed Down · (ft./min.)

Model NumberCapacity (lbs.)Lift (ft.)Full LoadNo LoadFull LoadNo LoadHeadroom (in.)Weight (lbs.)
HTC-1/4-10-C5001012120719712516.340
HTC-1/2-10-C100010601081086216.340
HTC-1-10-C2000103054543117.953
Quote thisCaldwell catalogue p284

Tell us the lift, we'll spec the hoist

Capacity, how often it runs, what's overhead, and what power you have. We'll come back with a part number and a price — and we inspect and repair hoists of every brand, not just the ones we sell.