Caldwell lifting beams

Construction for model numbers 16-1/4-4, 16-1/2-4, and 16-1-6 Construction for all other model numbers Bolt Type Anchor Shackle (tons) Weight (lbs.) Max. Min. Top Bottom

• ·2 Tons Capacity
• ·16-1-10 120 60 40 11 1.5 1.5 175
• ·Adjustable lifting points
• ·Handles both wide and unbalanced loads
• ·16-2-6 72 36 24 12 3.25 2 130
• ·16-2-8 96 48 32 13.50 3.25 2 200

Patent No. US 9,359,174, B2 Compare: 8'L, 1-ton beam weighs just 72 lbs. ... and only 79 with hardware! Dura-Lite™ Model 416 Composite Adjustable Lifting Beam

• ·Complies with ASME B30.20, design category B, service class 4
• ·Lightweight beam gives you additional load capacity while protecting riggers’ backs
• ·Non-conductive; corrosion-resistant material won’t rust
• ·1/4- to 3-ton capacities
• ·Proof tested with certificate issued
• ·Dura-Lite™ product is compliant with European Community standards CE

Bail Adjusted for Unbalanced Load

• ·Bail adjusts horizontally for lifting unbalanced loads
• ·Provides clearance in low headroom applications
• ·Spread adjusts in 6" increments along lifting beam
• ·Shackles included
• ·Optional swivel hooks available
• ·Complies with ASME standards

The Fixed Twin Basket Sling Lifting Beam should perhaps be called El Toro for its resemblance to a longhorn bull! Just as tough and ready to roll, this unique beam comes standard with two sets of bent bar hooks on all units with a spread of 6'L or greater, if you need a different configuration, let us know – it’s customizable.

• ·Designed to be used with slings in a basket hitch
• ·Provides greatest clearance in low-headroom applications
• ·Two sets of bent bar hooks are standard on units with a spread of 6' and greater
• ·Spread 2 is half of Spread 1
• ·Hooks are designed to handle up to a 2" sling eye width
• ·Complies with ASME standards

Elegantly simple design with a bent bar bail makes hooking and unhooking easy ... which is appreciated when the day is long and the picks are plentiful.

• ·Provides clearance in low-headroom applications
• ·Bent bar bail for easy crane hook attachment
• ·Eye hooks with hook latches standard
• ·Fixed spread
• ·Are You Looking For Slings, Tie-Downs, Slings Fittings?
• ·Complies with ASME standards

Patent No. US 9,359,174, B2 Provided as shown with lifting ring and load hooks Dura-Lite™ Model 419 Composite Fixed-Spread Lifting Beam

• ·Lightweight beam gives you additional load capacity while protecting riggers’ backs
• ·Non-conductive; corrosion-resistant material won’t rust
• ·1/4- to 3-ton capacities
• ·Complies with ASME B30.20, design category B, service class 4
• ·Proof tested with certificate issued
• ·Dura-Lite™ product is compliant with European Community standards CE

Versatility is the name of the game with the Model 20. Used across the country in manufacturing and industrial applications, it’s a favorite on construction sites, too.

• ·3 Model Number
• ·HR Headroom
• ·Weight
• ·20-3-3 15-1/4 70
• ·20-3-4 15-1/4 80
• ·20-3-6 16-1/4 140

Higher capacities? Greater outside spreads? Both? When you need a more powerful beam to do the work, the Model 20H is ready for the job. Standard units handle up to 40 tons with outside spreads up to 42'L.

• ·2 Model Number
• ·HR Headroom
• ·Weight
• ·‘I’ beam construction
• ·3 Model Number
• ·Three spreads to adjust to the load - Outside spread - Middle spread (outside less 1') - Inside spread (outside less 2')

Big loads? Heavy picks? Super-size lifts? No worries. The Model 20HC is ready and willing to do the work. With built-in beam stands and reinforced I-beam construction, this beauty is ready for whatever you throw at it.

• ·Heavy-duty I-beam construction
• ·Built-in beam stands for easy storage
• ·Pin bail allows for quick attachment of large crane hook
• ·Beams have three spreads for flexibility
• ·Lifting shackles are standard
• ·Complies with ASME standards

• ·Designed to be used with slings in a basket hitch
• ·Specially designed hooks with hook latches minimize potential sling damage
• ·Two sets of fixed hooks are standard in all lengths over 4'
• ·The inner set of hooks (S2) are half the overall spread
• ·Extra spreads and custom locations available upon request
• ·SPREAD

Off-center loads are easier than ever with the Model 24 Adjustable Bail Lifting Beam. Simply slide the bail along the channel an lock it into preset positions. Simple concept. Fantastic results.

• ·Handles off-center loads by adjusting the bail before a lift
• ·Adjustable spread options available
• ·Swivel hooks with hook latches standard
• ·Wide range of sizes and capacities available
• ·D TYP. SPREAD
• ·Complies with ASME standards

SPREAD. Capacity depends on both the span and the sling angle, so Caldwell publishes it as a chart rather than a list of part numbers. We haven’t retyped it here — read it off the chart on page 22 of their catalogue, or send us the span and the angle and we’ll confirm the rating in writing.

When you hook this Model 25 Twin Hoist Lifting Beam up to a hoist at each end, you have created a custom lifting device of sorts. By using the hoists in tandem, you increase load stability, which improves load safety.

• ·SPREAD
• ·T A B
• ·Use two or more hoists to increase lifting stability
• ·Swivel hook with hook latch
• ·Roller bearing hook is standard on 30- and 40-ton units; optional on other sizes
• ·HR O

When your facility uses bulk containers with four nylon loops, the Model 27SL helps protect the load, operator, and container.

• ·Tube construction for smooth surface with no sharp edges
• ·Low-headroom design
• ·Easily attach to load with open lifting lugs
• ·Lug spacing will hold up to a 3" wide loop
• ·3 3 10
• ·Oversized lifting eye to accept a wide range of hooks

When your facility uses bulk containers with four nylon loops, the Model 27SL helps protect the load, operator, and container.

• ·Tube construction for smooth surface with no sharp edges
• ·Low-headroom design
• ·Easily attach to load with open lifting lugs
• ·Lug spacing will hold up to a 3" wide loop
• ·3 3 10
• ·Oversized lifting eye to accept a wide range of hooks

Choose from three design options to build a custom 4-point beam for your specific application: Multiple Bails, Adjustable Bail, or Adjustable Spread. Complies with ASME standards.

Caldwell engineers this to the application rather than to a standard size table, so there are no catalogue part numbers. Tell us the load, the geometry and the headroom and we’ll have it quoted.

Choose from three design options to build a custom 4-point beam for your specific application: Multiple Bails, Adjustable Bail, or Adjustable Spread. Complies with ASME standards.

Caldwell engineers this to the application rather than to a standard size table, so there are no catalogue part numbers. Tell us the load, the geometry and the headroom and we’ll have it quoted.

Choose from three design options to build a custom 4-point beam for your specific application: Multiple Bails, Adjustable Bail, or Adjustable Spread. Complies with ASME standards.

Caldwell engineers this to the application rather than to a standard size table, so there are no catalogue part numbers. Tell us the load, the geometry and the headroom and we’ll have it quoted.

Dura-Lite™ Model 427 4-Point Lifting Beam This low-headroom, 4-point lifting beam handles large loads using multiple pick points. Each unit is custom designed for your specific application. Complies with ASME B30.20, design category B, service class 4.

• ·Lightweight to help decrease employee injuries
• ·Non-conductive for use around power sources
• ·Corrosion resistant for use in high-moisture environments; beam won't rust
• ·Available in metric sizes
• ·Can be built from standard models (Models 419 & 416)
• ·Custom designs available

Caldwell engineers this to the application rather than to a standard size table, so there are no catalogue part numbers. Tell us the load, the geometry and the headroom and we’ll have it quoted.

Dura-Lite™ Model 427 4-Point Lifting Beam This low-headroom, 4-point lifting beam handles large loads using multiple pick points. Each unit is custom designed for your specific application. Complies with ASME B30.20, design category B, service class 4.

• ·Lightweight to help decrease employee injuries
• ·Non-conductive for use around power sources
• ·Corrosion resistant for use in high-moisture environments; beam won't rust
• ·Available in metric sizes
• ·Can be built from standard models (Models 419 & 416)
• ·Custom designs available

Caldwell engineers this to the application rather than to a standard size table, so there are no catalogue part numbers. Tell us the load, the geometry and the headroom and we’ll have it quoted.

A specially designed lifting and rotating beam using two cranes or two hoists to horizontally rotate a load. A position locking pin holds the load rotation at a designated position. Available with motorized rotation.

• ·Customize with a wide range of sizes and capacities
• ·Twin Bails
• ·Complies with ASME standards
• ·Heavy Duty Rota on Bearing

Caldwell engineers this to the application rather than to a standard size table, so there are no catalogue part numbers. Tell us the load, the geometry and the headroom and we’ll have it quoted.

A specially designed lifting and rotating beam using two cranes or two hoists to horizontally rotate a load. A position locking pin holds the load rotation at a designated position. Available with motorized rotation.

• ·Customize with a wide range of sizes and capacities
• ·Twin Bails
• ·Complies with ASME standards
• ·Heavy Duty Rota on Bearing

Caldwell engineers this to the application rather than to a standard size table, so there are no catalogue part numbers. Tell us the load, the geometry and the headroom and we’ll have it quoted.

Lifting beams are available in a wide range of capacities and are custom designed to accommodate your application requirements. Lifting beams are designed per application.

• ·Low-headroom design
• ·Wide range of sizes and capacities
• ·Multiple spreads for hook placement
• ·Multiple hoist lifting capability

Caldwell engineers this to the application rather than to a standard size table, so there are no catalogue part numbers. Tell us the load, the geometry and the headroom and we’ll have it quoted.