RUD · Bolt-on lifting points

VWBG-V / VWBG

Name: RUD VWBG-V / VWBG
Brand: RUD

Screwed into a tapped hole or through-bolted. The common case, and the one where thread engagement and tightening torque decide whether it holds.

80 part numbers

RUD · boltable

A lifting point is a rated component. We inspect them too.

RUD · 8 tables

RUD VWBG-V / VWBG

Transcribed from RUD's USA catalogue. Figures are theirs — tonnes, kilograms and millimetres, with imperial tables where RUD publishes them.

Design factor 4:1

RUD catalogue p72 · 11 part numbers

RUD rates the same part at both 4:1 and 5:1. Use the figure that matches the design factor your application works to.

Type	WLL-X [t]	WLL-Y [t]	WLL-Z [t]	Weight (kg/unit)	T [mm]	A [mm]	B [mm]	C [mm]	D [mm]	E [mm]	F [mm]	G [mm]	M	Tightening torque [Nm]	Order no.
VWBG-V-0.3t-M8	0.3	0.4	0.6	0.18	2.99	0.31	1.22	1.14	1.18	1.06	13	1.42	M8	10	7103720
VWBG-V-0.45t-M10	0.45	0.6	0.9	0.29	3.07	0.31	1.22	1.14	1.32	1.18	17	1.50	M10	10	7103715
VWBG-V-0.6t-M12	0.6	0.75	1.2	0.41	4.21	0.39	1.93	1.38	1.65	1.42	21	1.85	M12	10	7100180
VWBG-V-1t-M14(F=21)	1	1.25	2	0.63	4.49	0.51	1.81	1.50	1.89	1.61	21	2.20	M14	25	7910221
VWBG-V-1.3t-M16	1.3	1.5	2.6	0.59	4.49	0.51	1.81	1.50	1.89	1.61	25	2.20	M16	30	7100430
VWBG-V-1.8t-M18(F=27)	1.8	2	3.6	1.18	5.39	0.51	2.13	1.38	2.44	2.17	27	2.64	M18	50	8600338
VWBG-V-2t-M20	2	2.5	4	1.42	5.39	0.51	2.13	1.38	2.44	2.17	33	2.64	M20	70	7100800
VWBG-V-2t-M22(F=33)	2	2.5	4	1.45	5.39	0.51	2.13	1.38	2.44	2.17	33	2.64	M22	120	8600334
VWBG-V-3.5t-M24	3.5	4	7	2.63	6.81	0.71	2.60	1.57	3.19	2.76	40	3.46	M24	150	7100640
VWBG-V-3.5t-M27(F=41)	3.5	4	7	2.65	6.81	0.71	2.60	1.57	3.19	2.76	41	3.46	M27	200	8600335
VWBG-V-5t-M30	5	6	10	5.09	8.70	0.87	3.54	1.97	3.90	3.35	50	4.17	M30	225	7100650

Design factor 4:1

RUD catalogue p72 · 13 part numbers

RUD rates the same part at both 4:1 and 5:1. Use the figure that matches the design factor your application works to.

Filter 13 part numbers

WLL-X [t]

WLL-Y [t]

WLL-Z [t]

Type	WLL-X [t]	WLL-Y [t]	WLL-Z [t]	Weight (kg/unit)	T [mm]	A [mm]	B [mm]	C [mm]	D [mm]	E [mm]	F [mm]	G [mm]	M	Tightening torque [Nm]	Order no.
VWBG-6(7.5)t-M33(F=50)	6	7.5	15	4.7	208	22	86	50	90	80	50	94	M33	350	8600150
VWBG-8(10)t-M36	8	10	15	4.7	208	22	86	50	90	80	54	94	M36	410	7999059
VWBG-12(13)t-M42	12	13	17	6.1	234	26	111	65	98	85	63	95	M42	550	7999044
VWBG-12(15)t-M45	12	15	18	6.2	234	26	111	65	98	85	67	95	M45	550	7900455
VWBG-13(16)t-M48	13	16	18	6.8	234	26	111	65	98	85	68	95	M48	550	7999045
VWBG-14(20)t-M52	14	20	25	10.6	271	32	119	70	120	95	78	120	M52	750	7901081
VWBG-16(22)t-M56	16	22	28	10.7	271	32	119	70	120	95	84	120	M56	800	7999004
VWBG-16(22)t-M60(F=90)	16	22	28	11.4	271	32	119	70	120	95	90	120	M60	800	8600454
VWBG-16(25)t-M64	16	25	28	11.4	271	32	119	70	120	95	94	120	M64	800	7999043
VWBG-31.5(40)t-M72	31.5	40	50	30	338	46	130	90	170	145	108	159	M72	1,200	7900097
VWBG-35(48)t-M80	35	48	50	31	338	46	130	90	170	145	120	159	M80	1,500	7900100
VWBG-40(50)t-M90	40	50	50	35	378	46	168	110	170	145	135	159	M90	2,000	7903408
VWBG-40(50)t-M100(F=150)	40	50	50	37	378	46	168	110	170	145	150	159	M100	2,000	8600458

Design factor 4:1 — vario length

RUD catalogue p73 · 11 part numbers

RUD rates the same part at both 4:1 and 5:1. Use the figure that matches the design factor your application works to.

Type	WLL-X [t]	WLL-Y [t]	WLL-Z [t]	Weight (kg/unit)	T [mm]	A [mm]	B [mm]	C [mm]	D [mm]	E [mm]	F vario [mm]	G [mm]	M	Tightening torque [Nm]	Order no.
VWBG-V-0.3t-M8	0.3	0.4	0.6	1	76	8	31	29	30	27	8–102	36	M8	10	8600330
VWBG-V-0.45t-M10	0.45	0.6	0.9	1	78	8	31	29	33.5	30	10–122	38	M10	10	8600331
VWBG-V-0.6t-M12	0.6	0.75	1.2	1	107	10	49	35	42	36	12–140	47	M12	10	8600332
VWBG-V-1t-M14	1	1.25	2	1	114	13	46	38	48	41	14–160	56	M14	25	8600337
VWBG-V-1.3t-M16	1.3	1.5	2.6	1	114	13	46	38	48	41	16–225	56	M16	30	8600333
VWBG-V-1.8t-M18	1.8	2	3.6	1	137	13	54	35	62	55	18–83	67	M18	50	8600338
VWBG-V-2t-M20	2	2.5	4	1	137	13	54	35	62	55	20–223	67	M20	70	8600334
VWBG-V-2t-M22	2	2.5	4	1	137	13	54	35	62	55	22–94	67	M22	120	8600334
VWBG-V-3.5t-M24	3.5	4	7	1	173	18	66	40	81	70	24–257	88	M24	150	8600335
VWBG-V-3.5t-M27	3.5	4	7	1	173	18	66	40	81	70	27–92	88	M27	200	8600335
VWBG-V-5t-M30	5	6	10	1	221	22	90	50	99	85	30–330	106	M30	225	8600336

1 Weight depends on the design.

Design factor 4:1 — vario length

RUD catalogue p73 · 10 part numbers

RUD rates the same part at both 4:1 and 5:1. Use the figure that matches the design factor your application works to.

Type	WLL-X [t]	WLL-Y [t]	WLL-Z [t]	Weight (kg/unit)	T [mm]	A [mm]	B [mm]	C [mm]	D [mm]	E [mm]	F vario [mm]	G [mm]	M	Tightening torque [Nm]	Order no.
VWBG-6(7.5)t	6	7.5	15	1	208	22	86	50	90	80	33–300	94	M33	350	8600150
VWBG-8(10)t	8	10	15	1	208	22	86	50	90	80	36–300	94	M36–M39	410	8600451
VWBG-12(13)t	12	13	17	1	234	26	111	65	98	85	42–300	95	M42–M45	550	8600452
VWBG-13(16)t	13	16	18	1	234	26	111	65	98	85	48–300	95	M48–M52	550	8600453
VWBG-14(20)t	14	20	25	1	271	32	119	70	120	95	52–300	120	M52	750	8600158
VWBG-16(22)t	16	22	28	1	271	32	119	70	120	95	56–300	120	M56–M60	800	8600454
VWBG-16(25)t	16	25	28	1	271	32	119	70	120	95	64–300	120	M64–M76	800	8600455
VWBG-31.5(40)t	31.5	40	50	1	338	46	130	90	170	145	72–300	159	M72–M76	1,200	8600456
VWBG-35(48)t	35	48	50	1	338	46	130	90	170	145	80–300	159	M80–M85	1,500	8600457
VWBG-40(50)t	40	50	50	1	378	46	168	110	170	145	90–300	159	M90–M150	2,000	8600458

1 Weight depends on the design.

Design factor 5:1 — imperial

RUD catalogue p74 · 7 part numbers

RUD rates the same part at both 4:1 and 5:1. Use the figure that matches the design factor your application works to.

Type	WLL-X [lbs]	WLL-Y [lbs]	WLL-Z [lbs]	Weight (lbs/unit)	T [inch]	A [inch]	B [inch]	C [inch]	D [inch]	E [inch]	F [inch]	G [inch]	M	Tightening torque [Nm]	Order no.
VWBG-V-0.3t-5/16"-18UNC	520	700	1,050	0.4	2.99	0.31	1.22	1.14	1.18	1.06	0.31	1.42	5/16"-18UNC	7.4	7991090
VWBG-V-0.45t-3/8"-16UNC	790	1,050	1,580	0.64	3.07	0.31	1.22	1.14	1.32	1.18	0.39	1.50	3/8"-16UNC	10	7991091
VWBG-V-0.6t-1/2"-13UNC	1,050	1,320	2,110	0.9	4.21	0.39	1.93	1.38	1.65	1.42	0.47	1.85	1/2"-13UNC	10	7991092
VWBG-V-1.3t-5/8"-11UNC	2,280	2,640	4,580	1.14	4.49	0.51	1.81	1.50	1.89	1.61	0.63	2.20	5/8"-11UNC	22	7991093
VWBG-V-2t-3/4"-10UNC	3,520	4,400	7,040	3.12	5.39	0.51	2.13	1.38	2.44	2.17	0.71	2.64	3/4"-10UNC	52	7991094
VWBG-V-3.5t-1"-8UNC	6,170	7,040	12,340	5.79	5.39	0.51	2.13	1.38	2.44	2.17	0.79	2.64	1"-8UNC	111	7991095
VWBG-V-5t-1 1/4"-7UNC	8,810	10,580	17,630	11.20	6.81	0.71	2.60	1.57	3.19	2.76	0.94	3.46	1 1/4"-7UNC	166	7991096

1 Weight depends on the design.

Design factor 5:1 — vario length — imperial

RUD catalogue p74 · 6 part numbers

RUD rates the same part at both 4:1 and 5:1. Use the figure that matches the design factor your application works to.

Type	WLL-X [lbs]	WLL-Y [lbs]	WLL-Z [lbs]	Weight (lbs/unit)	T [inch]	A [inch]	B [inch]	C [inch]	D [inch]	E [inch]	F vario [inch]	G [inch]	M	Tightening torque [Nm]	Order no.
VWBG-V-0.45t-3/8"-16UNC	790	1,050	1,580	1	3.07	0.31	1.22	1.14	1.32	1.18	0.39–0.67	1.50	3/8"-16UNC	10	8600331
VWBG-V-0.6t-1/2"-13UNC	1,050	1,320	2,110	1	4.21	0.39	1.93	1.38	1.65	1.42	0.47–0.83	1.85	1/2"-13UNC	10	8600332
VWBG-V-1.3t-5/8"-11UNC	2,280	2,640	4,580	1	4.49	0.51	1.81	1.50	1.89	1.61	0.63–1.14	2.20	5/8"-11UNC	22	8600333
VWBG-V-2t-3/4"-10UNC	3,520	4,400	7,040	1	5.39	0.51	2.13	1.38	2.44	2.17	0.71–1.10	2.64	3/4"-10UNC	52	8600334
VWBG-V-3.5t-1"-8UNC	6,170	7,040	12,340	1	5.39	0.51	2.13	1.38	2.44	2.17	0.79–1.50	2.64	1"-8UNC	111	8600335
VWBG-V-5t-1 1/4"-7UNC	8,810	10,580	17,630	1	6.81	0.71	2.60	1.57	3.19	2.76	0.94–1.85	3.46	1 1/4"-7UNC	166	8600336

1 Weight depends on the design.

Design factor 5:1 — vario length — imperial

RUD catalogue p75 · 11 part numbers

RUD rates the same part at both 4:1 and 5:1. Use the figure that matches the design factor your application works to.

Type	WLL-X [lbs]	WLL-Y [lbs]	WLL-Z [lbs]	T [inch]	A [inch]	B [inch]	C [inch]	D [inch]	E [inch]	F vario [inch]	G [inch]	M	Tightening torque [Nm]	Order no.
VWBG-8(10)t-1 1/2"-6UNC(F=57)	14,080	17,630	26,450	8.19	0.87	3.39	1.97	3.54	3.15	1.42–11.81	94	1 1/2"-6UNC	410	8600451
VWBG-12(13)t-1 3/4"-5UNC(F=66)	21,160	22,920	29,980	9.21	1.02	4.37	2.56	3.86	3.35	1.65–11.81	95	1 3/4"-5UNC	550	8600452
VWBG-13(16)t-2"-4.5UNC(F=76)	22,920	28,220	31,740	9.21	1.02	4.37	2.56	3.86	3.35	1.89–11.81	95	2"-4.5UNC	550	8600453
VWBG-16(22)t-2 1/4"-4.5UNC(F=85)	28,220	38,800	49,380	10.67	1.26	4.69	2.76	4.72	3.74	2.20–11.81	120	2 1/4"-4.5UNC	800	8600454
VWBG-16(22)t-2 1/2"-4UNC(F=95)	28,220	38,800	49,380	10.67	1.26	4.69	2.76	4.72	3.74	2.20–11.81	120	2 1/2"-4UNC	800	8600454
VWBG-16(25)t-2 3/4"-4UNC(F=104)	28,220	44,090	49,380	10.67	1.26	4.69	2.76	4.72	3.74	2.52–11.81	120	2 3/4"-4UNC	800	8600455
VWBG-31.5(40)t-3"-4UNC(F=114)	55,550	70,540	88,185	13.31	1.81	5.12	3.54	6.69	5.71	2.83–11.81	159	3"-4UNC	1,200	8600456
VWBG-35(48)t-3 1/2"-4UNC(F=133)	61,720	84,650	88,185	13.31	1.81	5.12	3.54	6.69	5.71	3.15–11.81	159	3 1/2"-4UNC	1,500	8600457
VWBG-40(50)t-4"-4UNC(F=150)	70,540	88,185	88,185	14.88	1.81	6.61	4.33	6.69	5.71	3.54–11.81	159	4"-4UNC	2,000	8600458
VWBG-40(50)t-4 1/2"-4UNC(F=170)	70,540	88,185	88,185	14.88	1.81	6.61	4.33	6.69	5.71	3.54–11.81	159	4 1/2"-4UNC	2,000	8600458
VWBG-40(50)t-5"-4UNC(F=190)	70,540	88,185	88,185	14.88	1.81	6.61	4.33	6.69	5.71	3.54–11.81	159	5"-4UNC	2,000	8600458

Design factor 5:1 — vario length — imperial

RUD catalogue p75 · 11 part numbers

RUD rates the same part at both 4:1 and 5:1. Use the figure that matches the design factor your application works to.

Type	WLL-X [lbs]	WLL-Y [lbs]	WLL-Z [lbs]	T [inch]	A [inch]	B [inch]	C [inch]	D [inch]	E [inch]	F vario [inch]	G [inch]	M	Tightening torque [Nm]	Order no.
VWBG-8(10)t-1 1/2"-BSW(F=57)	14,080	17,630	26,450	8.19	0.87	3.39	1.97	3.54	3.15	1.42–11.81	94	1 1/2"-6BSW	410	8600451
VWBG-12(13)t-1 3/4"-BSW(F=66)	21,160	22,920	29,980	9.21	1.02	4.37	2.56	3.86	3.35	1.65–11.81	95	1 3/4"-5BSW	550	8600452
VWBG-13(16)t-2"-BSW(F=76)	22,920	28,220	31,740	9.21	1.02	4.37	2.56	3.86	3.35	1.89–11.81	95	2"-4.5BSW	550	8600453
VWBG-16(22)t-2 1/4"-BSW(F=85)	28,220	38,800	49,380	10.67	1.26	4.69	2.76	4.72	3.74	2.20–11.81	120	2 1/4"-4BSW	800	8600454
VWBG-16(22)t-2 1/2"-BSW(F=95)	28,220	38,800	49,380	10.67	1.26	4.69	2.76	4.72	3.74	2.20–11.81	120	2 1/2"-4BSW	800	8600454
VWBG-16(25)t-2 3/4"-BSW(F=104)	28,220	44,090	49,380	10.67	1.26	4.69	2.76	4.72	3.74	2.52–11.81	120	2 3/4"-3.5BSW	800	8600455
VWBG-31.5(40)t-3"-BSW(F=114)	55,550	70,540	88,185	13.31	1.81	5.12	3.54	6.69	5.71	2.83–11.81	159	3"-3.5BSW	1,200	8600456
VWBG-35(48)t-3 1/2"-BSW(F=133)	61,720	84,650	88,185	13.31	1.81	5.12	3.54	6.69	5.71	3.15–11.81	159	3 1/2"-3.25BSW	1,500	8600457
VWBG-40(50)t-4"-BSW(F=150)	70,540	88,185	88,185	14.88	1.81	6.61	4.33	6.69	5.71	3.54–11.81	159	4"-3BSW	2,000	8600458
VWBG-40(50)t-4 1/2"-BSW(F=170)	70,540	88,185	88,185	14.88	1.81	6.61	4.33	6.69	5.71	3.54–11.81	159	4 1/2"-2.875BSW	2,000	8600458
VWBG-40(50)t-5"-BSW(F=190)	70,540	88,185	88,185	14.88	1.81	6.61	4.33	6.69	5.71	3.54–11.81	159	5"-2.75BSW	2,000	8600458

The rest of the range

Other bolt-on lifting points

All lifting points

Not sure which point the job wants?

Send us the load, the material it bolts or welds to, and the angle it will be pulled at. Getting the lifting point wrong is the most common reason a lift goes sideways.

Request a quote (651) 489-1341