Below-the-hook

Construction special applications

Name: Sharrow Lifting Products — Sharrow Lifting Products
Address: 2943 Yorkton Blvd., Little Canada, MN, 55117, US
Telephone: (651) 489-1341

Jobsite lifters that do not fit the usual categories — bucket forks, container assemblies, excavation hooks and the rest.

12 products · 92 part numbers

Caldwell

Every one of these is a rated lifting device. We inspect and repair them too — inspection.

Caldwell · 12 products

Caldwell construction special applications

Transcribed from Caldwell's master catalogue, with the page cited on every product. Figures are theirs, exactly as they print them.

CLSContainer Lifting Assemblies with Corky Hooks

Caldwell

Turn your loader into a forklift. They’re easy to attach ... simply place the tip of the bucket in the slot, tighten the bolt, and lift. There is nothing to weld! Sturdy, flame-cut handles make installation and removal fast.

Easily attaches to almost any solid blade bucket*
Sturdy construction
Open fork design
Easy storage
Cost effective
PRODUCT DETAILS

Model Number	Capacity Per Pair (lbs.)	LC	A	Dimensions (in.) B	C	CG	Weight Per Pair (lbs.)
COF-.95	1900	18	36	2	3	9-1/16	120
COF-1.25	2500	21	42	2	4	12-1/4	160
COF-2.75	5500	24	48	3	5	16-3/8	240
COF-4.5	9000	24	48	3	4	17-9/16	500
COF-5.5	11000	24	48	3	5	17-3/4	620

Close-up of NOTE: Blade must be less than 1/2” thick at the tip for proper attachment.
Other sizes available, please consult factory.

Part Number	Model Number	Use With	Wire Rope Diameter (in.)	Double-Leg Wire Rope Sling Part No. (2 Req'd)
32-31	CLS-20	20-ft. container	1-1/8	1-1/8"-15'-619-2OL/T/T
32-32	CLS-40	40-ft. container	1-1/8	1-1/8"-30'-619-2OL/T/T

Part Number	Model Number	Use With	AAL Model No. (2 Req'd)
32-33	CLS-24	20-ft. container	52-15-14.5 No Shackle/No Hook
32-34	CLS-44	40-ft. container	52-15-28.5 No Shackle/No Hook

Quote thisCaldwell catalogue p207

COFClamp-On Bucket Forks

Caldwell

Easily attaches to almost any solid blade bucket*
Sturdy construction
Open fork design
Easy storage
Cost effective
PRODUCT DETAILS

Model Number	Capacity Per Pair (lbs.)	LC	A	Dimensions (in.) B	C	CG	Weight Per Pair (lbs.)
COF-.95	1900	18	36	2	3	9-1/16	120
COF-1.25	2500	21	42	2	4	12-1/4	160
COF-2.75	5500	24	48	3	5	16-3/8	240
COF-4.5	9000	24	48	3	4	17-9/16	500
COF-5.5	11000	24	48	3	5	17-3/4	620

Close-up of NOTE: Blade must be less than 1/2” thick at the tip for proper attachment.
Other sizes available, please consult factory.

Part Number	Model Number	Use With	Wire Rope Diameter (in.)	Double-Leg Wire Rope Sling Part No. (2 Req'd)
32-31	CLS-20	20-ft. container	1-1/8	1-1/8"-15'-619-2OL/T/T
32-32	CLS-40	40-ft. container	1-1/8	1-1/8"-30'-619-2OL/T/T

Part Number	Model Number	Use With	AAL Model No. (2 Req'd)
32-33	CLS-24	20-ft. container	52-15-14.5 No Shackle/No Hook
32-34	CLS-44	40-ft. container	52-15-28.5 No Shackle/No Hook

Quote thisCaldwell catalogue p207

MPPPallet Puller

Caldwell

Align “Corky” Hook with cargo container lift fitting. Insert “Corky” Hook into the lift fitting slot. Apply tension to the choker cable. Indicator shows lug in locked position.

An efficient way to lift containers from bottom lifting slot
1.70 3.00
Handle indicator shows lug is engaged for lift
1.38 LEFT HAND UNIT RIGHT HAND UNIT
2.88
Complies to use with ASME B30.9 sling capacities

Caldwell engineers this to the application rather than to a standard size table, so there are no catalogue part numbers. Tell us the load, the geometry and the headroom and we’ll have it quoted.

Quote thisCaldwell catalogue p208

RLReel Lifter

Caldwell

Ensure the reel can withstand the forces applied by the lifter. Consult your reel supplier. Hey utility contractors! This is what you’ve been looking for. The Model RL Reel Lifter will help you handle reels of wire, cable better during loading, transporting, or on-site dispensing.

To prevent reel separation during lifting*
Rugged construction to lift and upend reels
Bearing included for easy rotation to unroll cable
One crane attachment point for both lifting and upending
Optional oblong can be added for large crane hooks
See the Model RL

Dimensions (in.) · Arbor Hole

Model Number	Rated Capacity (tons)	Min.	Max.	Min. Drum I.D.	Max. Flange Thickness	A	B	C	D	E	Weight (lbs.)
RL-.25	1/4	1.25	2	5.5	2	0.5	1.5	1.92	12.5	5	5
RL-1.5	1-1/2	2	4	10	3	0.5	1.5	1.92	14.44	8.5	8
RL-3	3	3	5	13	4	0.75	2	2.63	17.38	11	17
RL-5.5	5-1/2	4	6	16	5	1	2.5	3.5	22.19	14	25

Dimensions (in.)

Model Number	F	G	H	I
RL-.25	0.5	2.8	4.75	6.9
RL-1.5	0.5	2.8	4.75	6.9
RL-3	0.75	3.2	5.25	8.7
RL-5.5	1	4.3	7	11

Model Number	Rated Capacity (tons)	A (in.)	B (in.)	Handles Std. ASCE Rail (# per yard)	Weight (lbs.)
109 - 1	1	3	18	30 & 40	15
109 - 2	2	5	20	50 - 100	18

Quote thisCaldwell catalogue p209

RLTRail Tongs

Caldwell

To prevent reel separation during lifting*
Rugged construction to lift and upend reels
Bearing included for easy rotation to unroll cable
One crane attachment point for both lifting and upending
Optional oblong can be added for large crane hooks
See the Model RL

Dimensions (in.) · Arbor Hole

Model Number	Rated Capacity (tons)	Min.	Max.	Min. Drum I.D.	Max. Flange Thickness	A	B	C	D	E	Weight (lbs.)
RL-.25	1/4	1.25	2	5.5	2	0.5	1.5	1.92	12.5	5	5
RL-1.5	1-1/2	2	4	10	3	0.5	1.5	1.92	14.44	8.5	8
RL-3	3	3	5	13	4	0.75	2	2.63	17.38	11	17
RL-5.5	5-1/2	4	6	16	5	1	2.5	3.5	22.19	14	25

Dimensions (in.)

Model Number	F	G	H	I
RL-.25	0.5	2.8	4.75	6.9
RL-1.5	0.5	2.8	4.75	6.9
RL-3	0.75	3.2	5.25	8.7
RL-5.5	1	4.3	7	11

Model Number	Rated Capacity (tons)	A (in.)	B (in.)	Handles Std. ASCE Rail (# per yard)	Weight (lbs.)
109 - 1	1	3	18	30 & 40	15
109 - 2	2	5	20	50 - 100	18

Quote thisCaldwell catalogue p209

RGMulti-Grapple Lifting System

Caldwell

The Multi-Grappler arms automatically and securely grab on to irregular shapes. The center-mounted actuator automatically locks open the grappler arms for the next lift, providing for quick load cycles from load grip to load release.

Available in standard models with capacities from 3,000 to 6,000 pounds
Named one of Equipment Today’s 2020 Contractors’ Top 50 New Products
3-arm design
Automatic latching
Lifts irregular shaped objects or debris
Quick load cycles

Dimensions (in.) · Overall Height · Closed/Narrow Adj.

Model Number	Capacity (lbs.)	Min.	Max.	Grappler Opening Min.	Open/Wide Adj. Max.	Vertical	Closed/Narrow	Open/Wide	A	Lifting Ring B	C	Weight (lbs.)
RG-1.5-30.00	3000	0	24	14	30	13.71	71.09	51.85	.75	2	2.44	140
RG-3-40.00	6000	15	24	24	40	15.05	87.66	59.89	1	2.46	3.57	265

Quote thisCaldwell catalogue p210

RSPSkip Pan

Caldwell

Caldwell’s heavy-duty engineered Skip Pans are built with structural steel, channels, and angles which makes our pans rugged and built to last. The RSP has a sloped front end design that helps the skip pan to be easily emptied. It can be lifted with a single 4-way sling or one top sling and one rear sling.

SHACKLE SIZE REQUIRED
Forklift pockets optional
LENGTH
Lifting lugs
Custom sizes available
WIDTH

Dimensions

Model Number	Width	Inside Dimensions Height	Length	CU. YD	Capacity Lbs.	A	B	C	D	E	F	Empty Weight	Shackle Size
RSP-3-FP	48	32.0	96.0	2.63	6000	48.0	49.8	66.4	5.5	3.5	36.5	1400	3/4
RSP-3	48	32.0	96.0	2.63	6000	48.0	49.8	66.4	5.5	3.5	36.5	1280	3/4
RSP-4-FP	48	32.0	120.0	3.42	8000	72.0	49.8	90.4	5.5	3.5	38.5	1650	3/4
RSP-4	48	32.0	120.0	3.42	8000	72.0	49.8	90.4	5.5	3.5	38.5	1530	3/4
RSP-6-FP	48	32.0	144.0	4.2	12000	72.0	49.8	101.9	5.5	3.5	48.38	2050	3/4
RSP-6	48	32.0	144.0	4.2	12000	72.0	49.8	101.9	5.5	3.5	48.38	1900	3/4

Quote thisCaldwell catalogue p211

TCCTool Cylinder Cart

Caldwell

Custom Gas Cylinder Lifters Also Available!

Designed to lift and transport (2) gas cylinders, tools and supplies
9.0 DIA. MAX
21.5
Capacity: 1,000 lbs
Cart designed to hold up to (1) 9" and (1) 12" cylinder held in place with cylinder clamps
4.5 37.6

Caldwell engineers this to the application rather than to a standard size table, so there are no catalogue part numbers. Tell us the load, the geometry and the headroom and we’ll have it quoted.

Quote thisCaldwell catalogue p212

WPSewn-On Wear Pads Sling Accessories

Caldwell

Working with wall sections is never easy, but the Model WH Wall Hook makes it easier. With it, setting prefab wall sections becomes more efficient and faster.

Designed to upend, downend and place prefabricated wall sections
Retainer secures hook to the wall section with a detent pin
LOAD WIDTH
Hook has a gap in the center to accommodate a centered wall stud
Model Number
Rated Capacity

Dimensions (in.) · Load Width · Closed Position

Model Number	Rated Capacity (tons)	Min.	Max.	A	B	C	D	E	HR	T	Weight (lbs.)
WP - 1.25 - 4/6	2500	4.00	6.00	.75	3.00	5.00	18.1	37.8	33.75	32.00	53.0
WP - 1.25 - 8/12	2500	8.00	12.00	.75	3.00	5.00	23.8	39.8	35.75	32.75	62.0

Quote thisCaldwell catalogue p213

LHHLHeavy-Duty Lever Hoist

Caldwell

Rugged, all-steel construction
Machined and heat treated, split load double reduction gears
Totally enclosed brake mechanism
Short handle allows for easy operation, even in those hard to reach areas
Dimensions (in.) Weight
Model Number

Filter 32 part numbers

Capacity (lbs.)

Lift (ft.)

Force Lift (lbs.)

Model Number	Capacity (lbs.)	Lift (ft.)	Force Lift (lbs.)	A	Dimensions (in.) B	O	Weight (lbs.)
LHHL-.75-5	1500	5	54	5.7	4.7	0.93	13
LHHL-.75-10	1500	10	54	5.7	4.7	0.93	16
LHHL-.75-15	1500	15	54	5.7	4.7	0.93	18
LHHL-.75-20	1500	20	54	5.7	4.7	0.93	24
LHHL-1-5	2000	5	72	5.7	4.7	1.14	14
LHHL-1-10	2000	10	72	5.7	4.7	1.14	17
LHHL-1-15	2000	15	72	5.7	4.7	1.14	19
LHHL-1-20	2000	20	72	5.7	4.7	1.14	22
LHHL-1.5-5	2500	5	64	6.3	5	1.26	18
LHHL-1.5-10	2500	10	64	6.3	5	1.26	22
LHHL-1.5-15	2500	15	64	6.3	5	1.26	25
LHHL-1.5-20	2500	20	64	6.3	5	1.26	29
LHHL-2-5	4000	5	59	6.8	5.9	1.44	26
LHHL-2-10	4000	10	59	6.8	5.9	1.44	32
LHHL-2-15	4000	15	59	6.8	5.9	1.44	37
LHHL-2-20	4000	20	59	6.8	5.9	1.44	47
LHHL-2.75-5	5500	5	81	6.8	5.9	1.44	26
LHHL-2.75-10	5500	10	81	6.8	5.9	1.44	32
LHHL-2.75-15	5500	15	81	6.8	5.9	1.44	37
LHHL-2.75-20	5500	20	81	6.8	5.9	1.44	43
LHHL-3-5	6000	5	69	7.5	6.3	1.54	35
LHHL-3-10	6000	10	69	7.5	6.3	1.54	43
LHHL-3-15	6000	15	69	7.5	6.3	1.54	50
LHHL-3-20	6000	20	69	7.5	6.3	1.54	58
LHHL-6-5	12000	5	72	7.5	8.5	1.97	60
LHHL-6-10	12000	10	72	7.5	8.5	1.97	76
LHHL-6-15	12000	15	72	7.5	8.5	1.97	92
LHHL-6-20	12000	20	72	7.5	8.5	1.97	108
LHHL-9-5	18000	5	78	7.5	12	2.85	93
LHHL-9-10	18000	10	78	7.5	12	2.85	117
LHHL-9-15	18000	15	78	7.5	12	2.85	140
LHHL-9-20	18000	20	78	7.5	12	2.85	164

Scrolls — all 32 sizes are listed.

Quote thisCaldwell catalogue p214

100-6485Excavation Hook Clevis

Caldwell

Turn your excavating equipment into a reliable lifter with this weld-on hook. Carefully follow welding instructions for best results.

Latch prevents accidental unhooking of load
Latch is resistant to dirt, concrete, and ice
Stainless steel latch spring
Hook can be welded on without preheating
Welding Instructions:
Before welding, surface must be thoroughly cleaned and prepared

Dimensions (in.)

Model Number	Rated Capacity (lbs.)	A	B	C	D	Weight (lbs.)
BH-U1	2200	4-1/8	1	7/8	3	2
BH-U2	4400	4-7/8	1-1/4	1-1/8	3-3/8	3
BH-U3	6600	5-3/4	1-3/8	1-1/4	4	5
BH-U4	8800	6	1-3/8	1-1/4	4-1/4	5
BH-U6	13200	8-1/8	1-5/8	1-3/4	5	9
BH-U8	17600	8-1/2	2	1-3/4	5-1/2	12

manufacturer must be followed NOTE: Not rated for below the hook lifting.
• Includes tapered centering hook bushing NOTE: All dimensions shown in inches.

Quote thisCaldwell catalogue p215

WBHWeld-On Bucket Hook

Caldwell

Turn your excavating equipment into a reliable lifter with this weld-on hook. Carefully follow welding instructions for best results.

Latch prevents accidental unhooking of load
Latch is resistant to dirt, concrete, and ice
Stainless steel latch spring
Hook can be welded on without preheating
Welding Instructions:
Before welding, surface must be thoroughly cleaned and prepared

Dimensions (in.)

Model Number	Rated Capacity (lbs.)	A	B	C	D	Weight (lbs.)
BH-U1	2200	4-1/8	1	7/8	3	2
BH-U2	4400	4-7/8	1-1/4	1-1/8	3-3/8	3
BH-U3	6600	5-3/4	1-3/8	1-1/4	4	5
BH-U4	8800	6	1-3/8	1-1/4	4-1/4	5
BH-U6	13200	8-1/8	1-5/8	1-3/4	5	9
BH-U8	17600	8-1/2	2	1-3/4	5-1/2	12

manufacturer must be followed NOTE: Not rated for below the hook lifting.
• Includes tapered centering hook bushing NOTE: All dimensions shown in inches.

Quote thisCaldwell catalogue p215

Not a standard size?

Most of what we sell below the hook is engineered to the load. Send us the weight, the pick points and the headroom and we'll have it designed, built and proof tested.

Request a quote (651) 489-1341

Construction special applications

Caldwell construction special applications

CLSContainer Lifting Assemblies with Corky Hooks

COFClamp-On Bucket Forks

MPPPallet Puller

RLReel Lifter

RLTRail Tongs

RGMulti-Grapple Lifting System

RSPSkip Pan

TCCTool Cylinder Cart

WPSewn-On Wear Pads Sling Accessories

LHHLHeavy-Duty Lever Hoist

100-6485Excavation Hook Clevis

WBHWeld-On Bucket Hook

Other below-the-hook devices

Not a standard size?