Skip to content
Sharrow Lifting Products

Below-the-hook

Lifting hooks

Purpose-built hooks that go between the crane and the load — not rigging hardware, but the device itself.

17 products · 272 part numbers

M&W · Caldwell

Every one of these is a rated lifting device. We inspect and repair them too — inspection.

M&W · 14 lines

M&W lifting hooks

Machining & Welding by Olsen, built in Cokato from American-forged steel and shipped proof-loaded with certification paperwork.

Alloy Steel J-Hooks Eye Style C

Alloy Steel J-Hooks Eye Style C

M&W
  • ±4% on dimensions.
  • Custom designs available - call for engineering.
  • All eyes welded unless otherwise specified.
  • Manufactured to exceed all ASME B30.20 and OSHA regulations.
  • Corrosion resistant finish.
  • Durable construction ideally suited to jobsite or warehouse use.
  • Made in U.S.A.
  • Maximum use temperature is 400° F.
Alloy Steel J-Hooks Eye Style C dimensions
Dimensions as lettered in the table, from M&W’s catalog page 60.
Part NumberMaterial ø A in Inches*Standard Alloy Style C Steel J-Hooks - B (length)CDEWEIGHT
11653-5ø 1/4” WLL = 100 Pounds5”1.001.250.870.14
11653-6ø 1/4” WLL = 100 Pounds6”1.001.250.870.9
11653-7ø 1/4” WLL = 100 Pounds7”1.001.250.870.9
11653-8ø 1/4” WLL = 100 Pounds8”1.001.250.870.9
11653-9ø 1/4” WLL = 100 Pounds9”1.001.250.870.9
11653-10ø 1/4” WLL = 100 Pounds10”1.001.250.871
11653-12ø 1/4” WLL = 100 Pounds12”1.001.250.871
11653-14ø 1/4” WLL = 100 Pounds14”1.001.250.871
11654-5ø 5/16” WLL = 250 Pounds5”1.001.250.870.21
11654-6ø 5/16” WLL = 250 Pounds6”1.001.250.870.9
11654-7ø 5/16” WLL = 250 Pounds7”1.001.250.870.9
11654-8ø 5/16” WLL = 250 Pounds8”1.001.250.870.9
11654-9ø 5/16” WLL = 250 Pounds9”1.001.250.870.9
11654-10ø 5/16” WLL = 250 Pounds10”1.001.250.871
11654-12ø 5/16” WLL = 250 Pounds12”1.001.250.871
11654-14ø 5/16” WLL = 250 Pounds14”1.001.250.871
11655-5ø 3/8” WLL = 365 Pounds5”1.001.501.121.1
11655-6ø 3/8” WLL = 365 Pounds6”1.001.501.120.37
11655-7ø 3/8” WLL = 365 Pounds7”1.001.501.121.1
11655-8ø 3/8” WLL = 365 Pounds8”1.001.501.121.1
  • *Larger capacities and custom configurations available. Please call for ordering assistance.
Quote thisSizes and part numbers — catalog page 60 (PDF)
Alloy Steel S-Hooks Style A, B and C

Alloy Steel S-Hooks Style A, B and C

M&W
  • Manufactured to exceed all ASME B30.20 and OSHA regulations.
  • Corrosion resistant finish.
  • Durable construction ideally suited to jobsite or warehouse use.
  • Made in U.S.A.
  • Maximum use temperature is 400° F.
  • ±4% on dimensions.
  • Custom designs available - call for engineering.
  • Square and hex stock available.
Alloy Steel S-Hooks Style A, B and C dimensions
Dimensions as lettered in the table, from M&W’s catalog page 64.
Part Numberø APart Number Style A Style B Style C
141891/4—
141981/4—
142071/4—
141905/16—
141995/16—
142085/16—
141913/8—
142003/8—
142093/8—
141921/2—
142011/2—
142101/2—
141939/16—
142029/16—
142119/16—
141945/8—
142035/8—
142125/8—
141953/4—
142043/4—
142133/4—
141967/8—
142057/8—
142147/8—
141971—
142061—
142151—
  • *Larger capacities and custom configurations available. Please call for ordering assistance.
Quote thisSizes and part numbers — catalog page 64 (PDF)
Alloy Steel Flat Hooks

Alloy Steel Flat Hooks

M&W
  • Manufactured to exceed all ASME B30.20 and OSHA regulations.
  • Corrosion resistant finish.
  • Durable construction ideally suited to jobsite or warehouse use.
  • Made in U.S.A.
  • Maximum use temperature is 400° F .
  • ± 4% on dimensions.
  • Custom designs available - call for engineering.
  • Working Load Limit indicated is for the bottom of the hooks - DO NOT TIP LOAD .
  • Manufactured to exceed all ASME B30.20 and OSHA regulations.
  • Corrosion resistant finish.
  • Durable construction ideally suited to jobsite or warehouse use.
  • Made in U.S.A.
  • Maximum use temperature is 400° F .
  • Working Load Limit indicated is for the bottom of the hooks - DO NOT TIP LOAD .
Style A*Part NumberABCDEFGWeightWorking Load Limit in Pounds*Column 12PartABCDEFGWeightWorking Load Limit in
1/4163970.254.251.000.750.442.383.001.43,200—Number————————Pounds*
3/8163980.384.501.501.000.443.384.253.44,800———————————
———————————3/16176180.191.500.250.380.251.250.950.2400
1/2163990.504.751.751.250.444.385.256.26,400———————————
———————————3/16176190.191.500.380.500.251.250.950.2300
Style B*Part NumberABCDEFGWeightWorking Load Limit in Pounds*
1/4164000.254.251.000.750.442.383.001.03,200
3/8164010.384.501.501.500.443.384.253.34,800
1/2164020.504.751.751.750.444.385.256.06,400
  • *Larger capacities and custom configurations available. Please call for ordering assistance.
  • *Larger capacities and custom configurations available. Please call for ordering assistance.
Quote thisSizes and part numbers — catalog page 11 (PDF)
Alloy Steel Foundry Hooks

Alloy Steel Foundry Hooks

M&W
  • Manufactured to exceed all ASME B30.20 and OSHA regulations.
  • Corrosion resistant finish.
  • Durable construction ideally suited to jobsite or warehouse use.
  • Made in U.S.A.
  • Tapered tip.
  • Available in long and short reach.
  • Maximum use temperature is 400° F.
  • ±4% on dimensions.
  • Custom designs available - call for engineering.
  • All eyes welded unless otherwise specified.
Alloy Steel Foundry Hooks dimensions
Dimensions as lettered in the table, from M&W’s catalog page 62.
Material in Inches* A øPart NumberABLong Reach Foundry Hooks CDEWorking Load Limit in Pounds*Weight LBS
1/2146010.506.002.502.310.75500.90
5/8146020.628.503.503.380.758001.4
3/4146030.758.503.503.380.751,2502.0
13/16146040.818.503.503.250.881,6002.5
1146051.008.504.003.751.002,5004.0
Material in Inches* A øPart NumberABShort Reach Foundry Hooks CDEWorking Load Limit in Pounds*Weight LBS
1/2147820.506.003.003.000.75450.90
5/8147830.626.003.003.000.759001.4
3/4147840.756.003.003.000.751,4002.0
13/16147850.816.003.003.000.882,0002.5
1147861.006.003.003.001.003,0004.0
  • *Larger capacities and custom configurations available. Please call for ordering assistance.
  • *Larger capacities and custom configurations available. Please call for ordering assistance.
Quote thisSizes and part numbers — catalog page 62 (PDF)
Alloy Steel J-Hooks Eye Style 9

Alloy Steel J-Hooks Eye Style 9

M&W
  • ±4% on dimensions.
  • Custom designs available - call for engineering.
  • All eyes welded unless otherwise specified.
  • Manufactured to exceed all ASME B30.20 and OSHA regulations.
  • Corrosion resistant finish.
  • Durable construction ideally suited to jobsite or warehouse use.
  • Made in U.S.A.
  • Maximum use temperature is 400° F.
Alloy Steel J-Hooks Eye Style 9 dimensions
Dimensions as lettered in the table, from M&W’s catalog page 61.
Part NumberMaterial ø A in Inches*Standard Alloy Style 9 Steel J-Hooks - B (length)CDEWEIGHT
19475-5ø 1/4” WLL = 100 Pounds5”1.001.250.870.9
19475-6ø 1/4” WLL = 100 Pounds6”1.001.250.870.9
19475-7ø 1/4” WLL = 100 Pounds7”1.001.250.870.9
19475-8ø 1/4” WLL = 100 Pounds8”1.001.250.870.9
19475-9ø 1/4” WLL = 100 Pounds9”1.001.250.870.9
19475-10ø 1/4” WLL = 100 Pounds10”1.001.250.871
19475-12ø 1/4” WLL = 100 Pounds12”1.001.250.871
19475-14ø 1/4” WLL = 100 Pounds14”1.001.250.871
19476-5ø 5/16” WLL = 250 Pounds5”1.001.250.870.9
19476-6ø 5/16” WLL = 250 Pounds6”1.001.250.870.9
19476-7ø 5/16” WLL = 250 Pounds7”1.001.250.870.9
19476-8ø 5/16” WLL = 250 Pounds8”1.001.250.870.9
19476-9ø 5/16” WLL = 250 Pounds9”1.001.250.870.9
19476-10ø 5/16” WLL = 250 Pounds10”1.001.250.871
19476-12ø 5/16” WLL = 250 Pounds12”1.001.250.871
19476-14ø 5/16” WLL = 250 Pounds14”1.001.250.871
19477-5ø 3/8” WLL = 365 Pounds5”1.001.501.121.1
19477-6ø 3/8” WLL = 365 Pounds6”1.001.501.121.1
19477-7ø 3/8” WLL = 365 Pounds7”1.001.501.121.1
19477-8ø 3/8” WLL = 365 Pounds8”1.001.501.121.1
  • *Larger capacities and custom configurations available. Please call for ordering assistance.
Quote thisSizes and part numbers — catalog page 61 (PDF)
Alloy Steel J-Hooks Eye Style A

Alloy Steel J-Hooks Eye Style A

M&W
  • ±4% on dimensions.
  • Custom designs available - call for engineering.
  • All eyes welded unless otherwise specified.
  • Manufactured to exceed all ASME B30.20 and OSHA regulations.
  • Corrosion resistant finish.
  • Durable construction ideally suited to jobsite or warehouse use.
  • Made in U.S.A.
  • Maximum use temperature is 400° F.
Alloy Steel J-Hooks Eye Style A dimensions
Dimensions as lettered in the table, from M&W’s catalog page 58.
Part NumberMaterial ø A in Inches*Standard Alloy Style A Steel J-Hooks - B (length)CDEWEIGHT
11621-5ø 1/4” WLL = 100 Pounds5”1.001.250.870.14
11621-6ø 1/4” WLL = 100 Pounds6”1.001.250.870.9
11621-7ø 1/4” WLL = 100 Pounds7”1.001.250.870.9
11621-8ø 1/4” WLL = 100 Pounds8”1.001.250.870.9
11621-9ø 1/4” WLL = 100 Pounds9”1.001.250.870.9
11621-10ø 1/4” WLL = 100 Pounds10”1.001.250.871
11621-12ø 1/4” WLL = 100 Pounds12”1.001.250.871
11621-14ø 1/4” WLL = 100 Pounds14”1.001.250.871
11622-5ø 5/16” WLL = 250 Pounds5”1.001.250.870.21
11622-6ø 5/16” WLL = 250 Pounds6”1.001.250.870.9
11622-7ø 5/16” WLL = 250 Pounds7”1.001.250.870.9
11622-8ø 5/16” WLL = 250 Pounds8”1.001.250.870.9
11622-9ø 5/16” WLL = 250 Pounds9”1.001.250.870.9
11622-10ø 5/16” WLL = 250 Pounds10”1.001.250.871
11622-12ø 5/16” WLL = 250 Pounds12”1.001.250.871
11622-14ø 5/16” WLL = 250 Pounds14”1.001.250.871
Part NumberMaterial ø A in Inches*Standard Alloy Style A Steel J-Hooks - B (length)CDEValueWEIGHT
11623-5ø 3/8” WLL = 365 Pounds5”1.001.501.12—1.1
11623-6ø 3/8” WLL = 365 Pounds6”1.001.501.12—0.37
11623-7ø 3/8” WLL = 365 Pounds7”1.001.501.12—1.1
11623-8ø 3/8” WLL = 365 Pounds8”1.001.501.12—1.1
11623-9ø 3/8” WLL = 365 Pounds9”1.001.50—1.121.1
11623-10ø 3/8” WLL = 365 Pounds10”1.001.50—1.121.3
11623-12ø 3/8” WLL = 365 Pounds12”1.001.50—1.121.3
11623-14ø 3/8” WLL = 365 Pounds14”1.001.50—1.121.3
11624-5ø 1/2” WLL = 650 Pounds5”1.002.001.50—1.5
11624-6ø 1/2” WLL = 650 Pounds6”1.002.001.50—1.5
11624-7ø 1/2” WLL = 650 Pounds7”1.002.001.50—1.5
11624-8ø 1/2” WLL = 650 Pounds8”1.002.001.50—0.83
11624-9ø 1/2” WLL = 650 Pounds9”1.002.00—1.501.6
11624-10ø 1/2” WLL = 650 Pounds10”1.002.00—1.501.7
11624-12ø 1/2” WLL = 650 Pounds12”1.002.00—1.501.7
11624-14ø 1/2” WLL = 650 Pounds14”1.002.00—1.501.8
11625-5ø 5/8” WLL = 1,000 Pounds5”1.002.501.87—1.9
11625-6ø 5/8” WLL = 1,000 Pounds6”1.002.501.87—1.9
11625-7ø 5/8” WLL = 1,000 Pounds7”1.002.501.87—1.9
11625-8ø 5/8” WLL = 1,000 Pounds8”1.002.501.87—2
11625-9ø 5/8” WLL = 1,000 Pounds9”1.002.50—1.871.5
11625-10ø 5/8” WLL = 1,000 Pounds10”1.002.50—1.872
11625-12ø 5/8” WLL = 1,000 Pounds12”1.002.50—1.872.1
11625-14ø 5/8” WLL = 1,000 Pounds14”1.002.50—1.872.2
11626-6ø 3/4” WLL = 1,450 Pounds6”1.003.002.25—2.3
11626-7ø 3/4” WLL = 1,450 Pounds7”1.003.002.25—2.3
11626-8ø 3/4” WLL = 1,450 Pounds8”1.003.002.25—2.3
11626-9ø 3/4” WLL = 1,450 Pounds9”1.003.00—2.252.4
11626-10ø 3/4” WLL = 1,450 Pounds10”1.003.00—2.252.34
11626-12ø 3/4” WLL = 1,450 Pounds12”1.003.00—2.252.5
11626-14ø 3/4” WLL = 1,450 Pounds14”1.003.00—2.252.6
11627-8ø 7/8” WLL = 1,900 Pounds8”1.003.502.62—2.7
11627-9ø 7/8” WLL = 1,900 Pounds9”1.003.50—2.622.8
11627-10ø 7/8” WLL = 1,900 Pounds10”1.003.50—2.622.9
11627-12ø 7/8” WLL = 1,900 Pounds12”1.003.50—2.623.8
11627-14ø 7/8” WLL = 1,900 Pounds14”1.003.50—2.623.2

Scrolls — all 36 sizes are listed.

Part NumberMaterial ø A in Inches*Standard Alloy Style A Steel J-Hooks - B (length)CDValueWEIGHT
11628-10ø 1” WLL = 2,600 Pounds10”1.254.003.003
11628-12ø 1” WLL = 2,600 Pounds12”1.254.003.003.3
11628-14ø 1” WLL = 2,600 Pounds14”1.254.003.005.75
  • *Larger capacities and custom configurations available. Please call for ordering assistance.
Quote thisSizes and part numbers — catalog page 58 (PDF)
Alloy Steel J-Hooks Eye Style B

Alloy Steel J-Hooks Eye Style B

M&W
  • ±4% on dimensions.
  • Custom designs available - call for engineering.
  • All eyes welded unless otherwise specified.
  • Manufactured to exceed all ASME B30.20 and OSHA regulations.
  • Corrosion resistant finish.
  • Durable construction ideally suited to jobsite or warehouse use.
  • Made in U.S.A.
  • Maximum use temperature is 400° F.
Alloy Steel J-Hooks Eye Style B dimensions
Dimensions as lettered in the table, from M&W’s catalog page 59.
Part NumberMaterial ø A in Inches*Standard Alloy Style B Steel J-Hooks - B (length)CDEWEIGHT
11637-6ø 1/4” WLL = 100 Pounds6”1.001.250.870.9
11637-7ø 1/4” WLL = 100 Pounds7”1.001.250.870.9
11637-8ø 1/4” WLL = 100 Pounds8”1.001.250.870.9
11637-9ø 1/4” WLL = 100 Pounds9”1.001.250.870.9
11637-10ø 1/4” WLL = 100 Pounds10”1.001.250.871
11637-12ø 1/4” WLL = 100 Pounds12”1.001.250.871
11637-14ø 1/4” WLL = 100 Pounds14”1.001.250.871
11638-6ø 5/16” WLL = 250 Pounds6”1.001.250.870.9
11638-7ø 5/16” WLL = 250 Pounds7”1.001.250.870.9
11638-8ø 5/16” WLL = 250 Pounds8”1.001.250.870.9
11638-9ø 5/16” WLL = 250 Pounds9”1.001.250.870.9
11638-10ø 5/16” WLL = 250 Pounds10”1.001.250.871
11638-12ø 5/16” WLL = 250 Pounds12”1.001.250.871
11638-14ø 5/16” WLL = 250 Pounds14”1.001.250.871
11639-6ø 3/8” WLL = 365 Pounds6”1.001.501.120.37
11639-7ø 3/8” WLL = 365 Pounds7”1.001.501.121.1
11639-8ø 3/8” WLL = 365 Pounds8”1.001.501.121.1
11639-9ø 3/8” WLL = 365 Pounds9”1.001.501.121.1
11639-10ø 3/8” WLL = 365 Pounds10”1.001.501.121.3
11639-12ø 3/8” WLL = 365 Pounds12”1.001.501.121.3
  • *Larger capacities and custom configurations available. Please call for ordering assistance.
Quote thisSizes and part numbers — catalog page 59 (PDF)
Alloy Steel Latching J-Hooks

Alloy Steel Latching J-Hooks

M&W
  • Manufactured to exceed all ASME B30.20 and OSHA regulations.
  • Corrosion resistant finish.
  • Durable construction ideally suited to jobsite or warehouse use.
  • Made in U.S.A.
  • ±4% on dimensions.
  • All eyes welded unless otherwise specified.
  • Maximum use temperature is 400° F.
Alloy Steel Latching J-Hooks dimensions
Dimensions as lettered in the table, from M&W’s catalog page 63.

24 part numbers on this catalog page aren't in a table we could transcribe cleanly — they're on the PDF below, and we quote them the same way.

Quote thisSizes and part numbers — catalog page 63 (PDF)
Alloy Steel Sorting Hooks

Alloy Steel Sorting Hooks

M&W
  • Manufactured to exceed all ASME B30.20 and OSHA regulations.
  • Corrosion resistant finish.
  • Durable construction ideally suited to jobsite or warehouse use.
  • Made in U.S.A.
  • ±4% on dimensions.
  • Custom designs available - call for engineering.
  • All eyes welded unless otherwise specified.
  • Maximum use temperature is 400° F.
  • Handle not designed for lifting.
Alloy Steel Sorting Hooks dimensions
Dimensions as lettered in the table, from M&W’s catalog page 65.
in Inches* A øPart NumberBCDEFGWeightLimit in Pounds*
1/2134573.251.504.000.751.884.001.0100
3/41342513.502.008.001.004.006.004.5300
7/81342413.502.008.001.003.886.006.0450
  • *Larger capacities and custom configurations available. Please call for ordering assistance.
Quote thisSizes and part numbers — catalog page 65 (PDF)
Clevis Hooks For use with Grade 80 or Grade 100 Chain Slings

Clevis Hooks For use with Grade 80 or Grade 100 Chain Slings

M&W
  • Manufactured to exceed all ASME B30.20 and OSHA regulations.
  • Powder coat painted safety yellow for increased visibility.
  • ALL hooks shipped with proof load certification paperwork.
  • Durable construction ideally suited to jobsite or warehouse use.
  • Proof tested at 2 times working load limit.
  • Extra heavy duty formed stainless latch.
  • Large over-sized hook opening.
  • Made in U.S.A.
Clevis Hooks For use with Grade 80 or Grade 100 Chain Slings dimensions
Dimensions as lettered in the table, from M&W’s catalog page 73.
Working Load Limit in Pounds*Part NumberChain Size (in/mm)Column 4ABCDEFLRWeight per EachLatch Kit P/N
3,200258437/3262.41.253.552.750.751.48.87523889
4,30025842—72.41.253.552.750.751.48.87523889
Quote thisSizes and part numbers — catalog page 73 (PDF)
Insulated Swivel Hooks

Insulated Swivel Hooks

M&W
  • Manufactured to exceed all ASME B30.20 and OSHA regulations.
  • ALL Lifting Hooks proof loaded and shipped with certification paperwork.
  • Durable construction ideally suited to jobsite or warehouse use.
  • Made in U.S.A.
  • All dimensions in inches unless otherwise noted.
  • Electrically insulated - helps eliminate current flow that may damage hoists and lifting equipment.
  • 16355 Swivel hook with latch
  • 16358 Crosby Shur-Loc® hook
  • Insulated to 2,000 VDC
  • Do Not Rotate Under Load
Working Load Limit in Pounds*Part NumberABCDEFWeight in PoundsColor
4,000163550.752.253.759.01.02.756Yellow
4,500163580.752.253.8110.431.12.757Green
Quote thisSizes and part numbers — catalog page 70 (PDF)
Plate Lifting Hooks For use with Grade 80 or 100 Chain Slings

Plate Lifting Hooks For use with Grade 80 or 100 Chain Slings

M&W
  • Supplied
  • Powder
  • Made
  • Available
  • Recommended
  • Manufactured to exceed all ASME B30.20 and OSHA regulations.
  • Powder coat painted safety red for increased visibility.
  • ALL plate hooks shipped with proof load certification paperwork.
  • Durable construction ideally suited to jobsite or warehouse use.
  • Made in U.S.A.
  • Custom designs available - call for engineering.
Working Load Limit in Pounds*Part NumberGrade 100 Chain SizeABCDE - Hole SizeGWeightShackle Part Number
4,300117219/32”2.001.752.500.630.832.503M850P
8,800117223/8”2.633.004.310.750.953.006M851P
15,000117231/2”3.504.004.381.001.213.5013M853P
22,600188665/8”4.385.005.441.251.605.0027M855P
  • * Call for specifications on larger sizes and capacities - HOOKS SOLD INDIVIDUALLY
Quote thisSizes and part numbers — catalog page 69 (PDF)
Reel Lifting Hook

Reel Lifting Hook

M&W
  • 3,000
  • 6,000 when
  • 1” diameter
  • Hook matter
  • Shown
  • Optional request.
  • Call
  • Sold
  • Manufactured to exceed all ASME B30.20 and OSHA regulations.
  • Powder coat painted safety red for increased visibility.
  • Proof load certificates included.
  • Durable construction ideally suited to jobsite use.
  • Made in U.S.A.
  • ±4% on dimensions.
Working Load Limit in Pounds*Part NumberWeight
3,000134095
Quote thisSizes and part numbers — catalog page 66 (PDF)
Stirrup/Double Hooks

Stirrup/Double Hooks

M&W
  • Manufactured to exceed all ASME B30.20 and OSHA regulations.
  • Corrosion resistant finish.
  • Durable construction ideally suited to jobsite or warehouse use.
  • Made in U.S.A.
  • ±4% on dimensions.
  • Custom designs available - call for engineering.
  • Maximum use temperature is 400° F.
Stirrup/Double Hooks dimensions
Dimensions as lettered in the table, from M&W’s catalog page 67.

5 part numbers on this catalog page aren't in a table we could transcribe cleanly — they're on the PDF below, and we quote them the same way.

Quote thisSizes and part numbers — catalog page 67 (PDF)

Caldwell · 3 products

Caldwell lifting hooks

Transcribed from Caldwell's master catalogue, with the page cited on every product. Figures are theirs, exactly as they print them.

50 Motorized Rotating Crane Hook

50Motorized Rotating Crane Hook

Caldwell

Put the power and control in the crane operator’s skilled, capable hands with the Caldwell Motorized Rotating Crane Hook. With full 360° rotation, the operator can place loads in tough to reach or access locations with ease, orienting them exactly right.

  • Every unit is custom designed to fit your application
  • Allows for independent and precise position of load
  • Full 360° rotation @ 1-1/2 RPM
  • Controls feature soft-starting capability
  • Designed to operate on either direct or alternating power supply
  • Steel sheaves with hardened rope grooves and tapered roller bearings

Caldwell engineers this to the application rather than to a standard size table, so there are no catalogue part numbers. Tell us the load, the geometry and the headroom and we’ll have it quoted.

Quote thisCaldwell catalogue p88
HDMS Heavy-Duty Material Stands

HDMSHeavy-Duty Material Stands

Caldwell

Ergonomics. Safety. Accessibility. When you need to raise your product up to the right height for manufacturing, maintenance or repair processes, let Heavy-Duty Material Stands help. Each pair is custom designed to your specific application.

  • Designed to meet rated capacity
  • Available with fork pockets, casters, or both for easy transportation
  • Casters are collapsible under load
  • Stands are clearly marked with rated capacity

Caldwell engineers this to the application rather than to a standard size table, so there are no catalogue part numbers. Tell us the load, the geometry and the headroom and we’ll have it quoted.

Quote thisCaldwell catalogue p90
250 Mill Duty Motorized Rotating Crane Hook

250Mill Duty Motorized Rotating Crane Hook

Caldwell

Motorized Rotating Crane Hooks make rotating loads on the crane hook easy for the operator. Each unit is custom designed per your requirements.

  • Sheave pin includes lubrication fittings
  • External lubrication on heavy-duty thrust bearing
  • Heavy-duty worm gear reducer
  • Chain-and-sprocket final drive
  • Drive protection includes slip clutch
  • Designed for ease of maintenance

Caldwell engineers this to the application rather than to a standard size table, so there are no catalogue part numbers. Tell us the load, the geometry and the headroom and we’ll have it quoted.

Quote thisCaldwell catalogue p114

The rest of the range

Other below-the-hook devices

Lifting beams63Spreader beams36Coil lifters32Pallet lifters23Fork truck attachments32Lifting tongs12Roll lifters11Sheet lifters13Plate clamps40Beam clamps15Material baskets5Personnel baskets4Barrel, drum and bucket lifting18Concrete pipe lifting9Concrete barrier lifters3Container lifting2Bottle lifters1Load rotators and upenders9Vacuum lifters10Remote-releasing hooks3Construction special applications12Construction lifting magnets3

Not a standard size?

Most of what we sell below the hook is engineered to the load. Send us the weight, the pick points and the headroom and we'll have it designed, built and proof tested.

Request a quote(651) 489-1341