Below-the-hook

Vacuum lifters

Name: Sharrow Lifting Products — Sharrow Lifting Products
Address: 2943 Yorkton Blvd., Little Canada, MN, 55117, US
Telephone: (651) 489-1341

Lift plate, sheet and glass by suction, with nothing clamped to the edge and no mark left on the face.

10 products · 201 part numbers

Caldwell

Every one of these is a rated lifting device. We inspect and repair them too — inspection.

Caldwell · 10 products

Caldwell vacuum lifters

Transcribed from Caldwell's master catalogue, with the page cited on every product. Figures are theirs, exactly as they print them.

ASingle-Pad Heavy-Duty Vacuum Lifter

Caldwell

For lightweight material with small square shaped surface. Neither the width or the length should exceed 5 times the pad diameter (See specifications below for pad diameter.)

Ball-mounted vacuum pads
Brass fittings
Push-lock hose (designed for 250 psi)
Muffler/filter is spin on type for easy change out
Rated Capacity
(lbs.)

Filter 16 part numbers

Flared Diameter (in.)

Rated Capacity (lbs.)

Power-Pac

Rated Capacity (lbs.)	Weight (lbs.)	Model Number	Power-Pac	Flared Diameter (in.)
170	78	AE1S6	UNIVAC-250	7-1/4
310	80	AE3S8	UNIVAC-250	9-5/8
400	84	AE4V8	UNIVAC-250	10-5/8
600	87	AE6V10	UNIVAC-250	12-1/4
800	95	AE8V12	UNIVAC-250	14-1/4
1000	108	AE10V14	UNIVAC-250	16
1500	202	AE15V16	UNIVAC-250	19
2000	213	AE20V20	UNIVAC-250	23
170	20	AA1S6	V-40	7-1/4
310	22	AA3S8	V-40	9-5/8
400	28	AA4V8	V-40	10-5/8
600	30	AA6V10	V-40	12-1/4
800	33	AA8V12	V-40	14-1/4
1000	51	AA10V14	V-40	16
1500	53	AA15V16	V-40	19
2000	55	AA20V20	V-40	23

Other sizes available, consult factory.

Rated Capacity (lbs.)	Weight (lbs.)	Model Number	Power-Pac	Flared Diameter (in.)
3000	384	AE30V24	UNIVAC-330	27-5/8
3000	71	AA30V24	V-40	27-5/8

Quote thisCaldwell catalogue p145

BTwin-Pad Inline Load Beam Vacuum Lifter

Caldwell

For lifting smaller rectangular shaped material. Width should not exceed 5 times the pad diameter (See specifications below for pad diameter.)

Ball-mounted vacuum pads
Brass fittings
Single Pad is
Inline Pads is
Crossarm Pads
Push-lock hose (designed for 250 psi)

Model Number for Load Beam (choose beam length)

Filter 14 part numbers

Flared Diameter (in.)

Rated Capacity (lbs.)

Power-Pac

Rated Capacity (lbs.)	Base Wt. @ 5' (lbs.)	Power-Pac	Flared Diameter (in.)	4 ft.	5 ft.	6 ft.	8 ft.
160	130	UNIVAC-250	5	BE1S4-4	BE1S4-5	BE1S4-6	BE1S4-8
340	135	UNIVAC-250	7-1/4	BE3S6-4	BE3S6-5	BE3S6-6	BE3S6-8
620	140	UNIVAC-250	9-5/8	BE6S8-4	BE6S8-5	BE6S8-6	BE6S8-8
800	150	UNIVAC-250	10-5/8	BE8V8-4	BE8V8-5	BE8V8-6	BE8V8-8
1200	230	UNIVAC-250	12-1/4	BE12V10-4	BE12V10-5	BE12V10-6	BE12V10-8
1600	240	UNIVAC-250	14-1/4	BE16V12-4	BE16V12-5	BE16V12-6	BE16V12-8
2000	260	UNIVAC-250	16	BE20V14-4	BE20V14-5	BE20V14-6	BE20V14-8
160	140	V-40	5	BA1S4-4	BA1S4-5	BA1S4-6	BA1S4-8
340	170	V-40	7-1/4	BA3S6-4	BA3S6-5	BA3S6-6	BA3S6-8
620	175	V-40	9-5/8	BA6S8-4	BA6S8-5	BA6S8-6	BA6S8-8
800	180	V-40	10-5/8	BA8V8-4	BA8V8-5	BA8V8-6	BA8V8-8
1200	190	V-40	12-1/4	BA12V10-4	BA12V10-5	BA12V10-6	BA12V10-8
1600	200	V-40	14-1/4	BA16V12-4	BA16V12-5	BA16V12-6	BA16V12-8
2000	210	V-40	16	BA20V14-4	BA20V14-5	BA20V14-6	BA20V14-8

Other sizes available, consult factory.

Model Number for Load Beam (choose beam length)

Rated Capacity (lbs.)	Base Wt. @ 5' (lbs.)	Power-Pac	Flared Diameter (in.)	4 ft.	5 ft.	6 ft.	8 ft.
3000	355	UNIVAC-330	19	BE30V16-4	BE30V16-5	BE30V16-6	BE30V16-8
4000	375	UNIVAC-330	23	BE40V20-4	BE40V20-5	BE40V20-6	BE40V20-8
3000	225	V-40	19	BA30V16-4	BA30V16-5	BA30V16-6	BA30V16-8
4000	250	V-40	23	BA40V20-4	BA40V20-5	BA40V20-6	BA40V20-8

Quote thisCaldwell catalogue p146

CQuad-Pad Inline Load Beam Vacuum Lifter

Caldwell

Replacement Parts Available For lifting long, narrow material. Width should not exceed 5 times the pad diameter (See specifications below for pad diameter.)

Ball-mounted vacuum pads
Brass fittings
Push-lock hose (designed for 250 psi)
Slide valves allow for manual isolation of vacuum pads
And, turn to pages 164-165 for more info.
Muffler/filter is spin on type for easy change out

Model Number for Load Beam (choose beam length)

Rated Capacity (lbs.)	Base Wt. @ 5' (lbs.)	Power-Pac	Flared Diameter (in.)	5 ft.	6 ft.	8 ft.	10 ft.	12 ft.	15 ft.	20 ft.
680	203	UNIVAC-250	7-1/4	CE6S6-5	CE6S6-6	CE6S6-8	CE6S6-10	CE6S6-12	CE6S6-15	CE6S6-20
1240	223	UNIVAC-250	9-5/8	CE12S8-5	CE12S8-6	CE12S8-8	CE12S8-10	CE12S8-12	CE12S8-15	CE12S8-20
1600	280	UNIVAC-250	10-5/8	CE16V8-5	CE16V8-6	CE16V8-8	CE16V8-10	CE16V8-12	CE16V8-15	CE16V8-20
2400	295	UNIVAC-250	12-1/4	CE24V10-5	CE24V10-6	CE24V10-8	CE24V10-10	CE24V10-12	CE24V10-15	CE24V10-20
680	225	V-40	7-1/4	CA6S6-5	CA6S6-6	CA6S6-8	CA6S6-10	CA6S6-12	CA6S6-15	CA6S6-20
1240	230	V-40	9-5/8	CA12S8-5	CA12S8-6	CA12S8-8	CA12S8-10	CA12S8-12	CA12S8-15	CA12S8-20
1600	250	V-40	10-5/8	CA16V8-5	CA16V8-6	CA16V8-8	CA16V8-10	CA16V8-12	CA16V8-15	CA16V8-20
2400	265	V-40	12-1/4	CA24V10-5	CA24V10-6	CA24V10-8	CA24V10-10	CA24V10-12	CA24V10-15	CA24V10-20

Other sizes available, consult factory.

Model Number for Load Beam (choose beam length)

Rated Capacity (lbs.)	Base Wt. @ 5' (lbs.)	Power-Pac	Flared Diameter (in.)	5 ft.	6 ft.	8 ft.	10 ft.	12 ft.	15 ft.	20 ft.
3200	410	UNIVAC-330	14-1/4	CE32V12-5	CE32V12-6	CE32V12-8	CE32V12-10	CE32V12-12	CE32V12-15	CE32V12-20
4000	430	UNIVAC-330	16	CE40V14-5	CE40V14-6	CE40V14-8	CE40V14-10	CE40V14-12	CE40V14-15	CE40V14-20
6000	465	UNIVAC-330	19	CE60V16-5	CE60V16-6	CE60V16-8	CE60V16-10	CE60V16-12	CE60V16-15	CE60V16-20
3200	280	V-40	14-1/4	CA32V12-5	CA32V12-6	CA32V12-8	CA32V12-10	CA32V12-12	CA32V12-15	CA32V12-20
4000	315	V-40	16	CA40V14-5	CA40V14-6	CA40V14-8	CA40V14-10	CA40V14-12	CA40V14-15	CA40V14-20

Quote thisCaldwell catalogue p148

DDouble Crossarm Load Beam with Four Pads Vacuum Lifter

Caldwell

Univac® 250 for capacities less than 1240 lbs. Model DE6S6-6-D3. Univac® 250 for capacities of 1,240 to 2400 pounds. Model DE16V8-6-D3.

Ball -mounted vacuum pads
Brass fittings
Electric
Push-lock hose (designed for 250 psi)
Rated Capacity
(lbs.)

Model Number for Load Beam (choose beam length)

Capacity	Rated Capacity (lbs.)	Base Wt. @ 5' (lbs.)	Power-Pac	Flared Diameter (in.)	5 ft.	6 ft.	8 ft.
With 3' Crossarm Beams	680	290	UNIVAC-250	7-1/4	DE6S6-5-D3	DE6S6-6-D3	DE6S6-8-D3
With 3' Crossarm Beams	1240	310	UNIVAC-250	9-5/8	DE12S8-5-D3	DE12S8-6-D3	DE12S8-8-D3
With 3' Crossarm Beams	1600	350	UNIVAC-250	10-5/8	DE16V8-5-D3	DE16V8-6-D3	DE16V8-8-D3
With 3' Crossarm Beams	2400	365	UNIVAC-250	12-1/4	DE24V10-5-D3	DE24V10-6-D3	DE24V10-8-D3
With 4' Crossarm Beams	680	300	UNIVAC-250	7-1/4	DE6S6-5-D4	DE6S6-6-D4	DE6S6-8-D4
With 4' Crossarm Beams	1240	315	UNIVAC-250	9-5/8	DE12S8-5-D4	DE12S8-6-D4	DE12S8-8-D4
With 4' Crossarm Beams	1600	360	UNIVAC-250	10-5/8	DE16V8-5-D4	DE16V8-6-D4	DE16V8-8-D4
With 4' Crossarm Beams	2400	375	UNIVAC-250	12-1/4	DE24V10-5-D4	DE24V10-6-D4	DE24V10-8-D4

pages 162-163. Other sizes available, consult factory.
• Fork pockets Other sizes available, consult factory.
Other sizes available, consult factory.
*NOTE: 230/460V Power-Pac.

Model Number for Load Beam (choose beam length)

Capacity	Rated Capacity (lbs.)	Base Wt. @ 5' (lbs.)	Power-Pac	Flared Diameter (in.)	5 ft.	6 ft.	8 ft.
With 3' Crossarm Beams	680	315	V-40	7-1/4	DA6S6-5-D3	DA6S6-6-D3	DA6S6-8-D3
With 3' Crossarm Beams	1240	315	V-40	9-5/8	DA12S8-5-D3	DA12S8-6-D3	DA12S8-8-D3
With 3' Crossarm Beams	1600	320	V-40	10-5/8	DA16V8-5-D3	DA16V8-6-D3	DA16V8-8-D3
With 3' Crossarm Beams	2400	335	V-40	12-1/4	DA24V10-5-D3	DA24V10-6-D3	DA24V10-8-D3
With 4' Crossarm Beams	680	325	V-40	7-1/4	DA6S6-5-D4	DA6S6-6-D4	DA6S6-8-D4
With 4' Crossarm Beams	1240	325	V-40	9-5/8	DA12S8-5-D4	DA12S8-6-D4	DA12S8-8-D4
With 4' Crossarm Beams	1600	330	V-40	10-5/8	DA16V8-5-D4	DA16V8-6-D4	DA16V8-8-D4
With 4' Crossarm Beams	2400	345	V-40	12-1/4	DA24V10-5-D4	DA24V10-6-D4	DA24V10-8-D4

Model Number for Load Beam (choose beam length)

Capacity	Rated Capacity (lbs.)	Base Wt. @ 5' (lbs.)	Power-Pac	Flared Diameter (in.)	5 ft.	6 ft.	8 ft.
With 3' Crossarm Beams	3200	485	UNIVAC-330	14-1/4	DE32V12-5-D3	DE32V12-6-D3	DE32V12-8-D3
With 3' Crossarm Beams	4000	520	UNIVAC-330	16	DE40V14-5-D3	DE40V14-6-D3	DE40V14-8-D3
With 3' Crossarm Beams	6000	535	UNIVAC-330	19	DE60V16-5-D3	DE60V16-6-D3	DE60V16-8-D3
With 3' Crossarm Beams	8000	970	*UNIVAC-1500	23	DE80V20-5-D3	DE80V20-6-D3	DE80V20-8-D3
With 4' Crossarm Beams	3200	485	UNIVAC-330	14-1/4	DE32V12-5-D4	DE32V12-6-D4	DE32V12-8-D4
With 4' Crossarm Beams	4000	520	UNIVAC-330	16	DE40V14-5-D4	DE40V14-6-D4	DE40V14-8-D4
With 4' Crossarm Beams	6000	545	UNIVAC-330	19	DE60V16-5-D4	DE60V16-6-D4	DE60V16-8-D4
With 4' Crossarm Beams	8000	980	*UNIVAC-1500	23	DE80V20-5-D4	DE80V20-6-D4	DE80V20-8-D4

Model Number for Load Beam (choose beam length)

Capacity	Rated Capacity (lbs.)	Base Wt. @ 5' (lbs.)	Power-Pac	Flared Diameter (in.)	5 ft.	6 ft.	8 ft.
With 3' Crossarm Beams	3200	355	V-40	14-1/4	DA32V12-5-D3	DA32V12-6-D3	DA32V12-8-D3
With 3' Crossarm Beams	4000	380	V-40	16	DA40V14-5-D3	DA40V14-6-D3	DA40V14-8-D3
With 4' Crossarm Beams	3200	365	V-40	14-1/4	DA32V12-5-D4	DA32V12-6-D4	DA32V12-8-D4
With 4' Crossarm Beams	4000	390	V-40	16	DA40V14-5-D4	DA40V14-6-D4	DA40V14-8-D4

Quote thisCaldwell catalogue p150

ETriple Crossarm Load Beam with Six Pads Vacuum Lifter

Caldwell

For lifting long, wide, and moderate weight material or to provide increased support of thin material.

Ball -mounted vacuum pads
Brass fittings
Push-lock hose (designed for 250 psi)
Slide valves allow for manual isolation of vacuum pads
Muffler/filter is spin on type for easy change out
Electric

Model Number for Load Beam (choose beam length)

Capacity	Rated Capacity (lbs.)	Base Wt. @ 5' (lbs.)	Power-Pac	Flared Diameter (in.)	5 ft.	6 ft.	8 ft.	10 ft.	12 ft.	15 ft.
With 3' Crossarm Beams	480	405	UNIVAC-250	5	EE4S4-5-T3	EE4S4-6-T3	EE4S4-8-T3	EE4S4-10-T3	EE4S4-12-T3	EE4S4-15-T3
With 3' Crossarm Beams	1020	410	UNIVAC-250	7-1/4	EE10S6-5-T3	EE10S6-6-T3	EE10S6-8-T3	EE10S6-10-T3	EE10S6-12-T3	EE10S6-15-T3
With 3' Crossarm Beams	1860	420	UNIVAC-250	9-5/8	EE18S8-5-T3	EE18S8-6-T3	EE18S8-8-T3	EE18S8-10-T3	EE18S8-12-T3	EE18S8-15-T3
With 3' Crossarm Beams	2400	435	UNIVAC-250	10-5/8	EE24V8-5-T3	EE24V8-6-T3	EE24V8-8-T3	EE24V8-10-T3	EE24V8-12-T3	EE24V8-15-T3
With 4' Crossarm Beams	480	415	UNIVAC-250	5	EE4S4-5-T4	EE4S4-6-T4	EE4S4-8-T4	EE4S4-10-T4	EE4S4-12-T4	EE4S4-15-T4
With 4' Crossarm Beams	1020	420	UNIVAC-250	7-1/4	EE10S6-5-T4	EE10S6-6-T4	EE10S6-8-T4	EE10S6-10-T4	EE10S6-12-T4	EE10S6-15-T4
With 4' Crossarm Beams	1860	430	UNIVAC-250	9-5/8	EE18S8-5-T4	EE18S8-6-T4	EE18S8-8-T4	EE18S8-10-T4	EE18S8-12-T4	EE18S8-15-T4
With 4' Crossarm Beams	2400	445	UNIVAC-250	10-5/8	EE24V8-5-T4	EE24V8-6-T4	EE24V8-8-T4	EE24V8-10-T4	EE24V8-12-T4	EE24V8-15-T4

Other sizes available, consult factory.
*NOTE: 230/460V Power-Pac.

Model Number for Load Beam (choose beam length)

Capacity	Rated Capacity (lbs.)	Base Wt. @ 5' (lbs.)	Power-Pac	Flared Diameter (in.)	5 ft.	6 ft.	8 ft.	10 ft.	12 ft.	15 ft.
With 3' Crossarm Beams	480	380	V-40	5	EA4S4-5-T3	EA4S4-6-T3	EA4S4-8-T3	EA4S4-10-T3	EA4S4-12-T3	EA4S4-15-T3
With 3' Crossarm Beams	1020	385	V-40	7-1/4	EA10S6-5-T3	EA10S6-6-T3	EA10S6-8-T3	EA10S6-10-T3	EA10S6-12-T3	EA10S6-15-T3
With 3' Crossarm Beams	1860	400	V-40	9-5/8	EA18S8-5-T3	EA18S8-6-T3	EA18S8-8-T3	EA18S8-10-T3	EA18S8-12-T3	EA18S8-15-T3
With 3' Crossarm Beams	2400	420	V-40	10-5/8	EA24V8-5-T3	EA24V8-6-T3	EA24V8-8-T3	EA24V8-10-T3	EA24V8-12-T3	EA24V8-15-T3
With 4' Crossarm Beams	480	390	V-40	5	EA4S4-5-T4	EA4S4-6-T4	EA4S4-8-T4	EA4S4-10-T4	EA4S4-12-T4	EA4S4-15-T4
With 4' Crossarm Beams	1020	395	V-40	7-1/4	EA10S6-5-T4	EA10S6-6-T4	EA10S6-8-T4	EA10S6-10-T4	EA10S6-12-T4	EA10S6-15-T4
With 4' Crossarm Beams	1860	420	V-40	9-5/8	EA18S8-5-T4	EA18S8-6-T4	EA18S8-8-T4	EA18S8-10-T4	EA18S8-12-T4	EA18S8-15-T4
With 4' Crossarm Beams	2400	430	V-40	10-5/8	EA24V8-5-T4	EA24V8-6-T4	EA24V8-8-T4	EA24V8-10-T4	EA24V8-12-T4	EA24V8-15-T4

Model Number for Load Beam (choose beam length)

Capacity	Rated Capacity (lbs.)	Base Wt. @ 5' (lbs.)	Power-Pac	Flared Diameter (in.)	5 ft.	6 ft.	8 ft.	10 ft.	12 ft.	15 ft.
With 3' Crossarm Beams	3600	560	UNIVAC-330	12-1/4	EE36V10-5-T3	EE36V10-6-T3	EE36V10-8-T3	EE36V10-10-T3	EE36V10-12-T3	EE36V10-15-T3
With 3' Crossarm Beams	4800	580	UNIVAC-330	14-1/4	EE48V12-5-T3	EE48V12-6-T3	EE48V12-8-T3	EE48V12-10-T3	EE48V12-12-T3	EE48V12-15-T3
With 3' Crossarm Beams	6000	910	UNIVAC-330	16	EE60V14-5-T3	EE60V14-6-T3	EE60V14-8-T3	EE60V14-10-T3	EE60V14-12-T3	EE60V14-15-T3
With 3' Crossarm Beams	9000	930	*UNIVAC-1500	19	EE90V16-5-T3	EE90V16-6-T3	EE90V16-8-T3	EE90V16-10-T3	EE90V16-12-T3	EE90V16-15-T3
With 3' Crossarm Beams	12000	1216	*UNIVAC-1500	23	EE120V20-5-T3	EE120V20-6-T3	EE120V20-8-T3	EE120V20-10-T3	EE120V20-12-T3	EE120V20-15-T3
With 4' Crossarm Beams	3600	570	UNIVAC-330	12-1/4	EE36V10-5-T4	EE36V10-6-T4	EE36V10-8-T4	EE36V10-10-T4	EE36V10-12-T4	EE36V10-15-T4
With 4' Crossarm Beams	4800	590	UNIVAC-330	14-1/4	EE48V12-5-T4	EE48V12-6-T4	EE48V12-8-T4	EE48V12-10-T4	EE48V12-12-T4	EE48V12-15-T4
With 4' Crossarm Beams	6000	920	UNIVAC-330	16	EE60V14-5-T4	EE60V14-6-T4	EE60V14-8-T4	EE60V14-10-T4	EE60V14-12-T4	EE60V14-15-T4
With 4' Crossarm Beams	9000	940	*UNIVAC-1500	19	EE90V16-5-T4	EE90V16-6-T4	EE90V16-8-T4	EE90V16-10-T4	EE90V16-12-T4	EE90V16-15-T4
With 4' Crossarm Beams	12000	1226	*UNIVAC-1500	23	EE120V20-5-T4	EE120V20-6-T4	EE120V20-8-T4	EE120V20-10-T4	EE120V20-12-T4	EE120V20-15-T4

Model Number for Load Beam (choose beam length)

Capacity	Rated Capacity (lbs.)	Base Wt. @ 5' (lbs.)	Power-Pac	Flared Diameter (in.)	5 ft.	6 ft.	8 ft.	10 ft.	12 ft.	15 ft.
With 3' Crossarm Beams	3600	430	V-40	12-1/4	EA36V10-5-T3	EA36V10-6-T3	EA36V10-8-T3	EA36V10-10-T3	EA36V10-12-T3	EA36V10-15-T3
With 4' Crossarm Beams	3600	440	V-40	12-1/4	EA36V10-5-T4	EA36V10-6-T4	EA36V10-8-T4	EA36V10-10-T4	EA36V10-12-T4	EA36V10-15-T4

Quote thisCaldwell catalogue p152

FBeam Grabs

Caldwell

For lifting longer, wider, and heavier weight material or to provide increased support of thin material.

Ball -mounted vacuum pads
Brass fittings
Push-lock hose (designed for 250 psi)
Slide valves allow for manual isolation of vacuum pads
Muffler/filter is spin on type for easy change out
Electric

Model Number for Load Beam (choose beam length)

Capacity	Rated Capacity (lbs.)	Base Wt. @ 5' (lbs.)	Power-Pac	Flared Diameter (in.)	6 ft.	8 ft.	10 ft.	12 ft.	15 ft.	20 ft.
With 3' Crossarm Beams	640	525	UNIVAC-250	5	FE6S4-6-Q3	FE6S4-8-Q3	FE6S4-10-Q3	FE6S4-12-Q3	FE6S4-15-Q3	FE6S4-20-Q3
With 3' Crossarm Beams	1360	530	UNIVAC-250	7-1/4	FE13S6-6-Q3	FE13S6-8-Q3	FE13S6-10-Q3	FE13S6-12-Q3	FE13S6-15-Q3	FE13S6-20-Q3
With 3' Crossarm Beams	2400	540	UNIVAC-250	9-5/8	FE24S8-6-Q3	FE24S8-8-Q3	FE24S8-10-Q3	FE24S8-12-Q3	FE24S8-15-Q3	FE24S8-20-Q3
With 4' Crossarm Beams	640	535	UNIVAC-250	5	FE6S4-6-Q4	FE6S4-8-Q4	FE6S4-10-Q4	FE6S4-12-Q4	FE6S4-15-Q4	FE6S4-20-Q4
With 4' Crossarm Beams	1360	540	UNIVAC-250	7-1/4	FE13S6-6-Q4	FE13S6-8-Q4	FE13S6-10-Q4	FE13S6-12-Q4	FE13S6-15-Q4	FE13S6-20-Q4
With 4' Crossarm Beams	2400	550	UNIVAC-250	9-5/8	FE24S8-6-Q4	FE24S8-8-Q4	FE24S8-10-Q4	FE24S8-12-Q4	FE24S8-15-Q4	FE24S8-20-Q4
With 5' Crossarm Beams	640	545	UNIVAC-250	5	FE6S4-6-Q5	FE6S4-8-Q5	FE6S4-10-Q5	FE6S4-12-Q5	FE6S4-15-Q5	FE6S4-20-Q5
With 5' Crossarm Beams	1360	550	UNIVAC-250	7-1/4	FE13S6-6-Q5	FE13S6-8-Q5	FE13S6-10-Q5	FE13S6-12-Q5	FE13S6-15-Q5	FE13S6-20-Q5
With 5' Crossarm Beams	2400	570	UNIVAC-250	9-5/8	FE24S8-6-Q5	FE24S8-8-Q5	FE24S8-10-Q5	FE24S8-12-Q5	FE24S8-15-Q5	FE24S8-20-Q5

Other sizes available, consult factory.
NOTE: All venturi units include a side handle.

Model Number for Load Beam (choose beam length)

Capacity	Rated Capacity (lbs.)	Base Wt. @ 5' (lbs.)	Power-Pac	Flared Diameter (in.)	6 ft.	8 ft.	10 ft.	12 ft.	15 ft.	20 ft.
With 3' Crossarm Beams	640	475	V-40	5	FA6S4-6-Q3	FA6S4-8-Q3	FA6S4-10-Q3	FA6S4-12-Q3	FA6S4-15-Q3	FA6S4-20-Q3
With 3' Crossarm Beams	1360	490	V-40	7-1/4	FA13S6-6-Q3	FA13S6-8-Q3	FA13S6-10-Q3	FA13S6-12-Q3	FA13S6-15-Q3	FA13S6-20-Q3
With 3' Crossarm Beams	2400	520	V-40	9-5/8	FA24S8-6-Q3	FA24S8-8-Q3	FA24S8-10-Q3	FA24S8-12-Q3	FA24S8-15-Q3	FA24S8-20-Q3
With 4' Crossarm Beams	640	485	V-40	5	FA6S4-6-Q4	FA6S4-8-Q4	FA6S4-10-Q4	FA6S4-12-Q4	FA6S4-15-Q4	FA6S4-20-Q4
With 4' Crossarm Beams	1360	500	V-40	7-1/4	FA13S6-6-Q4	FA13S6-8-Q4	FA13S6-10-Q4	FA13S6-12-Q4	FA13S6-15-Q4	FA13S6-20-Q4
With 4' Crossarm Beams	2400	530	V-40	9-5/8	FA24S8-6-Q4	FA24S8-8-Q4	FA24S8-10-Q4	FA24S8-12-Q4	FA24S8-15-Q4	FA24S8-20-Q4
With 5' Crossarm Beams	640	495	V-40	5	FA6S4-6-Q5	FA6S4-8-Q5	FA6S4-10-Q5	FA6S4-12-Q5	FA6S4-15-Q5	FA6S4-20-Q5
With 5' Crossarm Beams	1360	510	V-40	7-1/4	FA13S6-6-Q5	FA13S6-8-Q5	FA13S6-10-Q5	FA13S6-12-Q5	FA13S6-15-Q5	FA13S6-20-Q5
With 5' Crossarm Beams	2400	540	V-40	9-5/8	FA24S8-6-Q5	FA24S8-8-Q5	FA24S8-10-Q5	FA24S8-12-Q5	FA24S8-15-Q5	FA24S8-20-Q5

Dimensions (in.) · Flange · Thickness · (THK)

Filter 16 part numbers

Rated Capacity (tons)

Min.

Max.

Model Number	Rated Capacity (tons)	A	B	C	Flange Width (W)	Min.	Max.	S	N	T	M	L	P	Weight (lbs.)
—	—	—	—	—	4	.25	.25	—	—	—	—	—	—	—
F-5	5	22.70	15.70	11.60	5	.25	.38	3	3	2	4.60	.50	.50	68
—	—	—	—	—	6 - 10	.25	1	—	—	—	—	—	—	—
—	—	—	—	—	7	.50	.75	—	—	—	—	—	—	—
—	—	—	—	—	8	.50	1	—	—	—	—	—	—	—
F-15	15	30.10	25.10	17.50	9	.50	1.25	4	4	2.50	7.30	.90	.80	210
—	—	—	—	—	10	.50	1.50	—	—	—	—	—	—	—
—	—	—	—	—	11 - 17	.25	2	—	—	—	—	—	—	—
—	—	—	—	—	16 - 17	1.25	3	—	—	—	—	—	—	—
F-25	25	44.80	45.20	24.50	—	—	—	5.5	6	4	9.80	1.30	.80	665
—	—	—	—	—	18 - 24	1	3	—	—	—	—	—	—	—
—	—	—	—	—	16 - 18	2.25	4	—	—	—	—	—	—	—
—	—	—	—	—	20 - 22	2	4	—	—	—	—	—	—	—
F-35	35	52.90	61.60	28.50	24	1.75	4	6	9.30	4.50	8.50	.80	.80	993
—	—	—	—	—	26	1.25	4	—	—	—	—	—	—	—
—	—	—	—	—	28 - 36	1	4	—	—	—	—	—	—	—

Quote thisCaldwell catalogue p154

U90° Tilt Upender/Downender Standard-Duty

Caldwell

Handle numerous non-porous materials and eliminate the additional work pieces and manpower required to properly position your product.

Standard 110V plug-in style power supply for easy installation
Vacuum reservoir maintains load in the event of power loss
Fully adjustable to handle varying lengths/widths of material
Linear actuator provides smooth, continuous tilting
Color-coded vacuum level indicator gauge is easy to read
Adjustable guide handle for ergonomic operation

Model Number (choose beam length)

Rated Capacity (lbs.)	Number of Pads	Pad Diameter (in.)	4 ft.	3 Crossarm Beam 6 ft.	8 ft.	4 ft.	4 Crossarm Beam 6 ft.	8 ft.	4 ft.	5 Crossarm Beam 6 ft.	8 ft.
100	4	4	UE1S3-4-D3	UE1S3-6-D3	UE1S3-8-D3	UE1S3-4-D4	UE1S3-6-D4	UE1S3-8-D4	UE1S3-4-D5	UE1S3-6-D5	UE1S3-8-D5
340	4	7-1/4	UE3S6-4-D3	UE3S6-6-D3	UE3S6-8-D3	UE3S6-4-D4	UE3S6-6-D4	UE3S6-8-D4	UE3S6-4-D5	UE3S6-6-D5	UE3S6-8-D5
620	4	9-5/8	UE6S8-4-D3	UE6S8-6-D3	UE6S8-8-D3	UE6S8-4-D4	UE6S8-6-D4	UE6S8-8-D4	UE6S8-4-D5	UE6S8-6-D5	UE6S8-8-D5
800	4	10-5/8	UE8V8-4-D3	UE8V8-6-D3	UE8V8-8-D3	UE8V8-4-D4	UE8V8-6-D4	UE8V8-8-D4	UE8V8-4-D5	UE8V8-6-D5	UE8V8-8-D5
1200	4	12-1/4	UE12V10-4-D3	UE12V10-6-D3	UE12V10-8-D3	UE12V10-4-D4	UE12V10-6-D4	UE12V10-8-D4	UE12V10-4-D5	UE12V10-6-D5	UE12V10-8-D5
1600	4	14-1/4	UE16V12-4-D3	UE16V12-6-D3	UE16V12-8-D3	UE16V12-4-D4	UE16V12-6-D4	UE16V12-8-D4	UE16V12-4-D5	UE16V12-6-D5	UE16V12-8-D5
2000	4	16	UE20V14-4-D3	UE20V14-6-D3	UE20V14-8-D3	UE20V14-4-D4	UE20V14-6-D4	UE20V14-8-D4	UE20V14-4-D5	UE20V14-6-D5	UE20V14-8-D5
180	4	6-7/8	UE1M5-4-D3	UE1M5-6-D3	UE1M5-8-D3	UE1M5-4-D4	UE1M5-6-D4	UE1M5-8-D4	UE1M5-4-D5	UE1M5-6-D5	UE1M5-8-D5
500	4	9-1/4	UE5M8-4-D3	UE5M8-6-D3	UE5M8-8-D3	UE5M8-4-D4	UE5M8-6-D4	UE5M8-8-D4	UE5M8-4-D5	UE5M8-6-D5	UE5M8-8-D5

Other sizes available, consult factory.
*10' main beam will be our heavy duty design.

Model Number (choose beam length)

Rated Capacity (lbs.)	Number of Pads	Pad Diameter (in.)	6 ft.	3 Crossarm Beam 8 ft.	10 ft.	6 ft.	4 Crossarm Beam 8 ft.	10 ft.	6 ft.	5 Crossarm Beam 8 ft.	10 ft.
200	8	4	UE2S3-6-Q3	UE2S3-8-Q3	UE2S3-10-Q3	UE2S3-6-Q4	UE2S3-8-Q4	UE2S3-10-Q4	UE2S3-6-Q5	UE2S3-8-Q5	UE2S3-10-Q5
320	8	5	UE3S4-6-Q3	UE3S4-8-Q3	UE3S4-10-Q3	UE3S4-6-Q4	UE3S4-8-Q4	UE3S4-10-Q4	UE3S4-6-Q5	UE3S4-8-Q5	UE3S4-10-Q5
680	8	7-1/4	UE6S6-6-Q3	UE6S6-8-Q3	UE6S6-10-Q3	UE6S6-6-Q4	UE6S6-8-Q4	UE6S6-10-Q4	UE6S6-6-Q5	UE6S6-8-Q5	UE6S6-10-Q5
1240	8	9-5/8	UE12S8-6-Q3	UE12S8-8-Q3	UE12S8-10-Q3	UE12S8-6-Q4	UE12S8-8-Q4	UE12S8-10-Q4	UE12S8-6-Q5	UE12S8-8-Q5	UE12S8-10-Q5
*1600	8	10-5/8	UE16V8-6-Q3	UE16V8-8-Q3	UE16V8-10-Q3	UE16V8-6-Q4	UE16V8-8-Q4	UE16V8-10-Q4	UE16V8-6-Q5	UE16V8-8-Q5	UE16V8-10-Q5
*2000	8	12-1/4	UE24V10-6-Q3	UE24V10-8-Q3	UE24V10-10-Q3	UE24V10-6-Q4	UE24V10-8-Q4	UE24V10-10-Q4	UE24V10-6-Q5	UE24V10-8-Q5	UE24V10-10-Q5
180	8	4-7/8	UE1M4-6-Q3	UE1M4-8-Q3	UE1M4-10-Q3	UE1M4-6-Q4	UE1M4-8-Q4	UE1M4-10-Q4	UE1M4-6-Q5	UE1M4-8-Q5	UE1M4-10-Q5
360	8	6-7/8	UE3M5-6-Q3	UE3M5-8-Q3	UE3M5-10-Q3	UE3M5-6-Q4	UE3M5-8-Q4	UE3M5-10-Q4	UE3M5-6-Q5	UE3M5-8-Q5	UE3M5-10-Q5
1000	8	9-1/4	UE10M8-6-Q3	UE10M8-8-Q3	UE10M8-10-Q3	UE10M8-6-Q4	UE10M8-8-Q4	UE10M8-10-Q4	UE10M8-6-Q5	UE10M8-8-Q5	UE10M8-10-Q5

Quote thisCaldwell catalogue p156

T90° Tilt Upender/Downender Heavy-Duty

Caldwell

Steel plate shown horizontal. Electric upenders allow the operator to position Lifting and rotation to 90° for assembly area, vertical storage, inspection, and glass handling applications.

Linear actuator provides smooth continuous tilting
Electric powered only
Mold on pads are used for glass applications
Non-Glass Material
3 Crossarm Beam 4 Crossarm Beam
Rated Capacity

5 Crossarm Beam · Model Number (choose beam length)

Filter 13 part numbers

4 Crossarm Beam 12 ft.	15 ft.	6 ft.	8 ft.	10 ft.	12 ft.	15 ft.
TE3S6-12-D4	TE3S6-15-D4	TE3S6-6-D5	TE3S6-8-D5	TE3S6-10-D5	TE3S6-12-D5	TE3S6-15-D5
TE8V8-12-D4	TE8V8-15-D4	TE8V8-6-D5	TE8V8-8-D5	TE8V8-10-D5	TE8V8-12-D5	TE8V8-15-D5
TE12V10-12-D4	TE12V10-15-D4	TE12V10-6-D5	TE12V10-8-D5	TE12V10-10-D5	TE12V10-12-D5	TE12V10-15-D5
TE16V12-12-D4	TE16V12-15-D4	TE16V12-6-D5	TE16V12-8-D5	TE16V12-10-D5	TE16V12-12-D5	TE16V12-15-D5
TE30V16-12-D4	TE30V16-15-D4	TE30V16-6-D5	TE30V16-8-D5	TE30V16-10-D5	TE30V16-12-D5	TE30V16-15-D5
TE40V20-12-D4	TE40V20-15-D4	TE40V20-6-D5	TE40V20-8-D5	TE40V20-10-D5	TE40V20-12-D5	TE40V20-15-D5
TE3S4-12-Q4	TE3S4-15-Q4	TE3S4-6-Q5	TE3S4-8-Q5	TE3S4-10-Q5	TE3S4-12-Q5	TE3S4-15-Q5
TE6S6-12-Q4	TE6S6-15-Q4	TE6S6-6-Q5	TE6S6-8-Q5	TE6S6-10-Q5	TE6S6-12-Q5	TE6S6-15-Q5
TE16V8-12-Q4	TE16V8-15-Q4	TE16V8-6-Q5	TE16V8-8-Q5	TE16V8-10-Q5	TE16V8-12-Q5	TE16V8-15-Q5
TE24V10-12-Q4	TE24V10-15-Q4	TE24V10-6-Q5	TE24V10-8-Q5	TE24V10-10-Q5	TE24V10-12-Q5	TE24V10-15-Q5
TE32V12-12-Q4	TE32V12-15-Q4	TE32V12-6-Q5	TE32V12-8-Q5	TE32V12-10-Q5	TE32V12-12-Q5	TE32V12-15-Q5
TE56V16-12-Q4	TE56V16-15-Q4	TE56V16-6-Q5	TE56V16-8-Q5	TE56V16-10-Q5	TE56V16-12-Q5	TE56V16-15-Q5
TE80V20-12-Q4	TE80V20-15-Q4	TE80V20-6-Q5	TE80V20-8-Q5	TE80V20-10-Q5	TE80V20-12-Q5	TE80V20-15-Q5

Other sizes available, consult factory.
*NOTE: 230/460V Power-Pac.

Model Number (choose beam length)

4 Crossarm Beam 12 ft.	15 ft.	6 ft.	8 ft.	5 Crossarm Beam 10 ft.	12 ft.	15 ft.
TE1M5-12-D4	TE1M5-15-D4	TE1M5-6-D5	TE1M5-8-D5	TE1M5-10-D5	TE1M5-12-D5	TE1M5-15-D5
TE5M8-12-D4	TE5M8-15-D4	TE5M8-6-D5	TE5M8-8-D5	TE5M8-10-D5	TE5M8-12-D5	TE5M8-15-D5
TE3M5-12-Q4	TE3M5-15-Q4	TE3M5-6-Q5	TE3M5-8-Q5	TE3M5-10-Q5	TE3M5-12-Q5	TE3M5-15-Q5
TE10M8-12-Q4	TE10M8-15-Q4	TE10M8-6-Q5	TE10M8-8-Q5	TE10M8-10-Q5	TE10M8-12-Q5	TE10M8-15-Q5

Quote thisCaldwell catalogue p158

MVLMechanical Vacuum Lifter - MVL N

Caldwell

The patented, revolutionary design of our vacuum generator requires no electrical or air line connections, just hang it on your hook and go! This is an economical solution for a wide range of applications where bringing power to the lifter is not practical or feasible—even the warning system requires no power. This virtually maintenance free design conforms to ASME standards.

No outside power source is required
Auto cycling valve provides a hands-free attach and release function
Patent No.
Large lifting bail accommodates a wide range of hook sizes
The Caldwell Mechanical Vacuum Lifter has very few moving parts that will need attention from the maintenance department
Headroom

Rated Capacity (lbs.)	Number of Pads	Pad Diameter (in.)	Main Beam Length (ft.)	A	Dimensions (in.) C	HR	Weight (lbs.)	Model Number
—	—	—	4	—	—	—	100	BM3S6-4
300	2	7-1/4	—	0.75	3.34	44-1/4	—	—
—	—	—	6	—	—	—	105	BM3S6-6

Other sizes available, consult factory.

Rated Capacity (lbs.)	Number of Pads	Pad Diameter (in.)	Main Beam Length (ft.)	A	Dimensions (in.) C	HR	Weight (lbs.)	Model Number
—	—	—	5	—	—	—	230	CM6S6-5
600	4	7-1/4	6	1.5	4.3	52-1/4	241	CM6S6-6
—	—	—	8	—	—	—	262	CM6S6-8

Model Number for Crossarm Beam (choose beam length)

Filter 14 part numbers

Pad Diameter (in.)

Rated Capacity (lbs.)

Main Beam Length (ft.)

Rated Capacity (lbs.)	Number of Pads	Pad Diameter (in.)	Main Beam Length (ft.)	A	Dimensions (in.) C	HR	Weight (lbs.)	3 ft.	4 ft.	5 ft.
—	—	—	4	—	—	—	110	DM3S4-4-D3	DM3S4-4-D4	DM3S4-4-D5
300	4	5	—	0.75	3.34	44-1/4	—	—	—	—
—	—	—	6	—	—	—	215	DM3S4-6-D3	DM3S4-6-D4	DM3S4-6-D5
—	—	—	4	—	—	—	240	DM6S6-4-D3	DM6S6-4-D4	DM6S6-4-D5
600	4	7-1/4	6	1.5	4.3	54-1/2	256	DM6S6-6-D3	DM6S6-6-D4	DM6S6-6-D5
—	—	—	8	—	—	—	272	DM6S6-8-D3	DM6S6-8-D4	DM6S6-8-D5
—	—	—	4	—	—	—	245	DM8S8-4-D3	DM8S8-4-D4	DM8S8-4-D5
800	4	9-5/8	6	1.5	4.3	54-1/2	261	DM8S8-6-D3	DM8S8-6-D4	DM8S8-6-D5
—	—	—	8	—	—	—	272	DM8S8-8-D3	DM8S8-8-D4	DM8S8-8-D5
—	—	—	4	—	—	—	532	DM15V10-4-D3	DM15V10-4-D4	DM15V10-4-D5
—	—	—	6	—	—	—	558	DM15V10-6-D3	DM15V10-6-D4	DM15V10-6-D5
1500	4	12-1/2	—	1.5	4.3	66	—	—	—	—
—	—	—	8	—	—	—	600	DM15V10-8-D3	DM15V10-8-D4	DM15V10-8-D5
—	—	—	10	—	—	—	642	DM15V10-10-D3	DM15V10-10-D4	DM15V10-10-D5

Model Number for Crossarm Beam (choose beam length)

Rated Capacity (lbs.)	Number of Pads	Pad Diameter (in.)	Main Beam Length (ft.)	A	Dimensions (in.) C	HR	Weight (lbs.)	3 ft.	4 ft.	5 ft.
—	—	—	4	—	—	—	550	EM15V8-4-T3	EM15V8-4-T4	EM15V8-4-T5
—	—	—	6	—	—	—	568	EM15V8-6-T3	EM15V8-6-T4	EM15V8-6-T5
1500	6	10-5/8	—	1.5	4.3	66	—	—	—	—
—	—	—	8	—	—	—	610	EM15V8-8-T3	EM15V8-8-T4	EM15V8-8-T5
—	—	—	10	—	—	—	652	EM15V8-10-T3	EM15V8-10-T4	EM15V8-10-T5

Quote thisCaldwell catalogue p160

WHDTorch Cylinder Cart with Fork Pockets - TCC-FB

Caldwell

Uniclamp™ Welding Hold Down Clamp Eliminates the gap between the plate and the stiffener This conventional setup can take up to two hours to complete. The process includes welding lugs, dogs and bridges in place - positioning awkward and heavy equipment - then removing these setups and cleaning up the attachment points.

Designed to lift and transport (2) gas cylinders, tools and supplies
9.0 DIA. MAX
21.5
Capacity: 1,000 lbs
Cart designed to hold up to (1) 9" and (1) 12" cylinder held in place with cylinder clamps
4.5 37.6

Dimensions (in.) · Load Width · Closed Position

Model Number	Rated Capacity (tons)	Min.	Max.	A	B	C	D	E	HR	T	Weight (lbs.)
WP - 1.25 - 4/6	2500	4.00	6.00	.75	3.00	5.00	18.1	37.8	33.75	32.00	53.0
WP - 1.25 - 8/12	2500	8.00	12.00	.75	3.00	5.00	23.8	39.8	35.75	32.75	62.0

Note: Uniclamps™ are not designed for lifting purposes
• Wide push handle with grips NOTE: All dimensions
2.6 NOTE: All dimensions

Quote thisCaldwell catalogue p167

Not a standard size?

Most of what we sell below the hook is engineered to the load. Send us the weight, the pick points and the headroom and we'll have it designed, built and proof tested.

Request a quote (651) 489-1341

Vacuum lifters

Caldwell vacuum lifters

ASingle-Pad Heavy-Duty Vacuum Lifter

BTwin-Pad Inline Load Beam Vacuum Lifter

CQuad-Pad Inline Load Beam Vacuum Lifter

DDouble Crossarm Load Beam with Four Pads Vacuum Lifter

ETriple Crossarm Load Beam with Six Pads Vacuum Lifter

FBeam Grabs

U90° Tilt Upender/Downender Standard-Duty

T90° Tilt Upender/Downender Heavy-Duty

MVLMechanical Vacuum Lifter - MVL N

WHDTorch Cylinder Cart with Fork Pockets - TCC-FB

Other below-the-hook devices

Not a standard size?