Anchorage connectors

26 part numbers

• Lightweight and durable polyester web construction
• Meets the requirements for 29 CFR OSHA 1910.140, and OSHA 1926.502
• Recommended for use in multiple industries including construction, mining, oil and gas, transportation, utilities, and wind energy
• Adjustable designs available to accommodates a variety of different sized structures
• Compatible with various fall arrest systems
• This safety equipment is designed for use with additional personal fall arrest systems
• Features high-strength steel hardware
• Portable and reusable
• Ideal anchorage device for scaffolding or piping

11 part numbers

• Portable and reusable
• Meets the requirements for ANSI/ASSP Z359.18, 29 CFR OSHA 1910.140 and 29 CFR OSHA 1926.502.
• Recommended for use in multiple industries including construction, mining, and oil and gas
• Compact and lightweight design
• High strength steel O-ring hardware
• Variable length pass-thru type tie off adaptor
• Durable 3/8 in. (9.5 mm) 7x19 stainless steel cable construction

8 part numbers

• Available in different lengths for jobsite versatility
• Do not use anchorage until it is embedded in cured concrete
• Compatible with various fall arrest systems
• Features high-strength steel hardware
• Economical disposable design
• Meets the requirements for ANSI Z359.18, OSHA 1910.140 and OSHA 1926.502.
• Recommended for use in construction and mining industries

7 part numbers

• Portable and reusable
• Meets the requirements for ANSI/ASSP Z359.18, 29 CFR OSHA 1910.140 and 29 CFR OSHA 1926.502.
• Recommended for use in multiple industries including construction, mining, and oil and gas
• Compact and lightweight design
• High strength steel O-ring hardware
• Variable length 1/4 in. vinyl coated galvanized cable anchor extension with snap hook at one end, O-ring at other.
• Durable 1/4 in. (6.3 mm) 7x19 galvanized steel cable with vinyl jacket
• High strength self locking snap hook at one end

7 part numbers

• Lightweight and durable polyester web construction
• Meets the requirements for 29 CFR OSHA 1910.140, and OSHA 1926.502
• Recommended for use in multiple industries including construction, mining, oil and gas, transportation, utilities, and wind energy
• Adjustable designs available to accommodates a variety of different sized structures
• Compatible with various fall arrest systems
• This safety equipment is designed for use with additional personal fall arrest systems
• Features high-strength steel hardware
• Portable and reusable
• Ideal anchorage device for scaffolding or piping
• 3 ft. (0.9 m) pass-thru type tie-off adaptor
• Abrasion resistant polyester wear pad

6 part numbers

• High strength construction
• Compact and lightweight design
• Rugged and corrosion resistant
• Installs into 11/16 in., 18 mm or 3/4 in. concrete hole
• Use vertically in wall or horizontally in ceiling
• Install as temporary or permanent anchor
• Reusable D-ring assembly - extra bolts available separately
• Safe hook-up indicator
• Swiveling D-ring tie-off point

5 part numbers

• High strength construction
• Compact and lightweight design
• Rugged and corrosion resistant
• Bolt or weld to structure for fall arrest anchor point
• Compact steel plate
• Pre-drilled holes
• Zinc plated and Stainless Steel D-ring for compatible tie-off point

5 part numbers

• Portable and reusable
• Meets the requirements for ANSI/ASSP Z359.18, 29 CFR OSHA 1910.140 and 29 CFR OSHA 1926.502.
• Recommended for use in multiple industries including construction, mining, and oil and gas
• Compact and lightweight design
• High strength steel O-ring hardware
• Variable length cable tie-off adaptor
• Durable 1/4 in. (6.3 mm) 7x19 galvanized steel cable
• Unique dual-ring design is easily repositioned
• Two high strength steel D-rings at one end
• Self locking and closing steel carabiner at one end
• Replaces incompatible "basket" type configurations

5 part numbers

• Compact and lightweight aluminum design is easy to transport, install, and use
• Provides a secure tie-off point on smooth, non-porous surfaces using vacuum technology
• Approved for horizontal lifeline use
• Heavy-duty storage and transport case
• Compatible with external air power sources for added versatility
• Self-contained design includes on-board air bottle. Compatible with external air power options.
• Comprehensive backup system features an audio alarm and vacuum-level indicator
• Built-in check valves provide safety during accidental air loss
• Aviation-rated, intrinsically safe electronics
• Meets the requirements for 29 CFR OSHA 1910.140, OSHA 1926.502
• Can provide power for one additional secondary unit

5 part numbers

• Lightweight and durable polyester web construction
• Meets the requirements for 29 CFR OSHA 1910.140, and OSHA 1926.502
• Recommended for use in multiple industries including construction, mining, oil and gas, transportation, utilities, and wind energy
• Adjustable designs available to accommodates a variety of different sized structures
• Compatible with various fall arrest systems
• This safety equipment is designed for use with additional personal fall arrest systems
• Features high-strength steel hardware
• Portable and reusable
• Ideal anchorage device for scaffolding or piping
• Variable length web scaffold choker with D-ring and web loop

4 part numbers

• Available in 2, 6, 8.5, and 10 ft. lengths
• Installs into 1-1/2 in. to 1-3/4 in. dia. hole (38.1 to 44.5 mm) In Concrete, minimum thickness of 4 in. (101.6 mm)
• Use on overhead concrete or steel applications
• Fall arrest- and restraint-rated for one worker for jobsite versatility
• Features high-strength stainless steel construction
• Partially shielded cable for added protection
• Compatible with various fall arrest systems
• Compact, lightweight design
• Meets the requirements for OSHA 1910.140 and OSHA 1926.502.
• Recommended for use in multiple industries including general industrial, mining, and oil and gas

4 part numbers

• Durable materials and hardware designed to help stand up to harsh working conditions
• Compatible with various fall arrest systems, not compliant for use with Horizontal Lifelines
• Suitable for use in general industrial and construction industries
• Compact, lightweight design
• Meets the requirements for 29 CFR OSHA 1910.140 and 29 CFR OSHA 1926.502
• Features corrosion-resistant, steel and aluminum construction for durability
• This safety equipment is designed for use with additional personal protective equipment (PPE)
• Includes permanent or detachable options and reusable D-ring assembly
• Installs onto various sizes of wood-framed structures
• Designed to fit multiple size trusses with bolt and clamp installation
• Integral stainless steel D-ring tie-off point

4 part numbers

• Easy to transport. Under 30 lbs. for ease of transport and installation
• Simple to setup up installs on the ladder in 5 minutes or less. Versatile installation allows the ladder anchor to be mounted to front or behind the ladder with left, right or center alignments.
• Compatible with your existing fall protection harness. Unlike a fixed cable system, this solution doesn’t require a front D-ring, which can reduce overall implementation costs.
• Designed for durability and built to withstand permanent or temporary applications
• Meets requirements of 29 CFR OSHA 1910 Walking Working Surfaces Section 1910.27
• Available in galvanized or stainless steel

4 part numbers

• Compatible with various fall protection systems
• Compact, lightweight design
• Ideal for use with personal fall arrest systems with self-retracting lifelines
• Recommended for use in the construction, general industrial, mining, oil and gas, transportation, utilities, and wind energy industries
• Portable and reusable
• Corrosion-resistant construction for durability
• This safety equipment is designed for use with additional personal protective equipment (PPE)
• Fixed beam anchor fits variable width I-beams
• Attach in any orientation or direction with detent style attachment with built-in tightening handle
• High strength steel and aluminum construction with Swiveling D-ring tie-off point
• ANSI / ASSP Z359.18 and meets the requirements of 29 CFR OSHA 1910.140, OSHA 1926

3 part numbers

• Compatible with various fall protection systems
• Compact, lightweight design
• Ideal for use with personal fall arrest systems with self-retracting lifelines
• Recommended for use in the construction, general industrial, mining, oil and gas, transportation, utilities, and wind energy industries
• Portable and reusable
• Corrosion-resistant construction for durability
• This safety equipment is designed for use with additional personal protective equipment (PPE)
• Models designed to fit a variety of beam sizes
• Fully adjustable integrated dual ratcheting adjustment system slides to fit snugly against the beam
• Replaceable wear pads eliminate metal-to-metal contact and extend the usability of the product.
• Guarded locking mechanism located on the bottom to reduce chance of accidental disengagement

3 part numbers

• Compatible with various fall protection systems
• Compact, lightweight design
• Ideal for use with personal fall arrest systems with self-retracting lifelines
• Recommended for use in the construction, general industrial, mining, oil and gas, transportation, utilities, and wind energy industries
• Portable and reusable
• Corrosion-resistant construction for durability
• This safety equipment is designed for use with additional personal protective equipment (PPE)
• Hands-free mobility and a 360-degree swiveling D-ring, which helps optimize the user's work while on a beam
• Models designed to fit a variety of beam sizes
• Visible adjustability dual-ratchet buttons accessible above the beam
• Snap-in design of wear pads allows for quick replacement in the field

3 part numbers

• Durable materials and hardware designed to help stand up to harsh working conditions
• Compatible with various fall arrest systems, not compliant for use with Horizontal Lifelines
• Suitable for use in general industrial and construction industries
• Compact, lightweight design
• Meets the requirements for 29 CFR OSHA 1910.140 and 29 CFR OSHA 1926.502
• Features corrosion-resistant, steel and aluminum construction for durability
• This safety equipment is designed for use with additional personal protective equipment (PPE)
• Z, U, and E Maxi Clamp 4-Pack Kits
• For use with standing seam roof top anchor
• Fits bulb, single folded, or double folded seams

2 part numbers

• Variable lengths available 6 in., 12 in., and 20 in. (15 cm, 30.5 cm, and 50 cm)
• Fastener kit for use with roof top anchor
• Suitable for flat roofs on trapezoidal and plywood deck, hollow concrete structures, or membrane and built-up roof decks
• Corrosion resistant construction
• User friendly compact and lightweight design
• Compatible with various fall arrest systems
• Recommended for use in multiple industries including construction, oil and gas, and utilities

2 part numbers

• Portable and reusable
• Meets the requirements for ANSI/ASSP Z359.18, 29 CFR OSHA 1910.140 and 29 CFR OSHA 1926.502.
• Recommended for use in multiple industries including construction, mining, and oil and gas
• Compact and lightweight design
• High strength steel O-ring hardware
• Variable length galvanized cable tie-off adaptor, pass thru type
• Durable galvanized steel cable construction

2 part numbers

• Durable materials and hardware designed to help stand up to harsh working conditions
• Compatible with various fall arrest systems, not compliant for use with Horizontal Lifelines
• Suitable for use in general industrial and construction industries
• Compact, lightweight design
• Meets the requirements for 29 CFR OSHA 1910.140 and 29 CFR OSHA 1926.502
• Features corrosion-resistant, steel and aluminum construction for durability
• This safety equipment is designed for use with additional personal protective equipment (PPE)
• Installs to sloped or flat wood roofs
• Includes 3 ea. lag screws for fast and easy installation
• Built-in D-ring tie-off point
• Portable and reusable

2 part numbers

• Corrosion resistant plated steel hardware
• High strength construction with 3,600 lb (16kN) rated gate
• Double action and locking gate for added safety
• Compact design
• Designed to allow horizontal movement along the anchorage, but does not include capability to pass intersecting structures
• Compatible with various fall arrest systems
• Recommended for use in multiple industries including construction, oil and gas, and utilities
• Meets the requirements for 29 CFR OSHA 1910.140, 29 CFR OSHA 1926.502

2 part numbers

• Portable Pylon Anchor is ideal for anchoring the 3M™ Rollgliss™ descender system
• Use on a variety of surfaces for added flexibility
• System does not require special tools or equipment to install
• Portable design is easily moved by hand
• This safety equipment is designed for use with additional personal protective equipment
• Twenty individual 45 lb. (20 kg) counterweights included
• Quick and easy installation
• Durable and corrosion resistant construction

2 part numbers

• Lightweight and durable polyester web construction
• Meets the requirements for 29 CFR OSHA 1910.140, and OSHA 1926.502
• Recommended for use in multiple industries including construction, mining, oil and gas, transportation, utilities, and wind energy
• Adjustable designs available to accommodates a variety of different sized structures
• Compatible with various fall arrest systems
• This safety equipment is designed for use with additional personal fall arrest systems
• Features high-strength steel hardware
• Portable and reusable
• Ideal anchorage device for scaffolding or piping

2 part numbers

• Compatible with various fall protection systems
• Compact, lightweight design
• Ideal for use with personal fall arrest systems with self-retracting lifelines
• Recommended for use in the construction, general industrial, mining, oil and gas, transportation, utilities, and wind energy industries
• Portable and reusable
• Corrosion-resistant construction for durability
• This safety equipment is designed for use with additional personal protective equipment (PPE)
• Installs onto 3 in. to 8 in. (7.6 - 20.3 cm.) wide and up to 11/16 in. (1.7 cm.) thick I-beam flange and attaches anywhere on a horizontal beam with complete horizontal mobility and a hands-free design.
• Fixed rotating D-ring mounts in the center for better weight distribution
• Rotating D-ring tie-off point is fixed in center

2 part numbers

• Rugged and corrosion resistant material construction for durability with compact and lightweight design
• Use vertically in wall or horizontally in ceiling (both components)
• High strength steel construction
• Compatible with various fall arrest systems
• Meets the requirements for 29 CFR OSHA 1910.140, and OSHA 1926.502
• Recommended for use in the construction, general industrial, mining, oil and gas, and utilities industries
• This safety equipment is designed for use with additional personal fall protection systems (PPE)
• Available in 6 in (15 cm) or 12 in (30.5 cm) 4-pack
• Fastener kit for use with roof top anchor
• Suitable for solid or hollow concrete structures

2 part numbers

• Compact and lightweight aluminum design is easy to transport, install, and use
• Provides a secure tie-off point on smooth, non-porous surfaces using vacuum technology
• Approved for horizontal lifeline use
• Heavy-duty storage and transport case
• Secondary vacuum anchor pad for aviation industry vacuum anchor lifeline system
• Attaches to primary pad unit with air hose (model 2200130)
• Audible and visual alarms for complete safety
• Built-in check valves provide safety during accidental air loss
• Rubber seals won't damage surface when installed as defined in the user instruction manual.

2 part numbers

• Corrosion resistant plated steel hardware
• High strength construction with 3,600 lb (16kN) rated gate
• Double action and locking gate for added safety
• Compact design
• Designed to allow horizontal movement along the anchorage, but does not include capability to pass intersecting structures
• Compatible with various fall arrest systems
• Recommended for use in multiple industries including construction, oil and gas, and utilities
• Meets the requirements for 29 CFR OSHA 1910.140, 29 CFR OSHA 1926.502